I am an Engineering Student and studying about RF Mixers. I want to know what are Amplitude Balance and Phase Balance in RF Mixers and how much critical are these parameters? Mixer HMC-C041
The HMC-C088 comes standard with two female SMA connectors (field replaceable).
I would like to have a HMC-C088 with one male SMA connector at RFIN. The sconnector at VIDEO OUT is fine with either male or female SMA connector
Can that be ordered?
I have a design that uses the HMC 7357 with the HMC 980 to control the gate and drain voltage on the HMC 7357 and after a few hours to a few days of operation I am seeing the HMC7357 failing. The HMC 7357 is operating at 7.7V and the RF drive is 0 dBm…
I’m working on a design whichcontains several Hittite HMC-463 and HMC-ALH244 amplifiers (unpackageddie). Neither of these parts show a specification for second orderintermodulation in the data sheet. Can Hittite provide this information? Also, the HMC…
Do we have the on wafer measured S-parameter file for the following Hittite Components :
Also I want to know whether these die are internally compensated or not for bond wire inductance.
I will use HMC-abh209 / HMC-alh382 / HMC-sdd112 in my design,
Would you please help to provide as below?
1. S parameter
2. Input R + jX
3. Output R + jX
4. Gerber file
currently we DO NOT offer the 3D models for these products.
the detailed package drawings and dimensions are included in the datasheet along with the S-parameter plots.
We are prototyping a low noise amplifier based on the combination of an HMC-ALH476 and HMC981LP3E. We are using the HMC981LP3E to set the gate voltage to control the drain current, using component values suggested on P18 of the HMC981LP3e data sheet…