HMC-ALH369 will be applied to TDD solution and Vdd be used for on/off control.
So we want to know RF on/off time of HMC-ALH369.
Customer measured the RF swithcing time by herself and it is 800 nsec.
Is it correct?
I am designing a low noise amplifier in Ka Band with hmc-alh369, this amplifier will be installed inside a box that is not hermetic. Alumium box has a elastomer gasket to protech of the external enviroment.
Is neccesary an Hermetic box with internal ni…
Please provide the S-Parameters
As you commented, ESD level for HMC-ALH369 is Class 0 HBM.
Our customer requests the channel temperature data of HMC-APH403-DIE. Could you please let me know ?
He compares HMC-APH403-DIE with a competitor. If he takes the data quickly, there is some chance of beating.
The HMC-C019 consists of 2 HMC547 die in series. As long as you optimized the layout for isolation there is no reason a PCB version of the HMC-C019 should not work as well.
Please create separate posts requesting die dimensions for the following products:
BTW, each datasheet has figures with die dimensions and bond pad locations.
Find both Q&A below.
1. We only show decoupling for one side of the die. The top side in the view below has the same supply pads. Is decoupling only on one side required and can it be either side?Yes the supplies only on south or north…
The HMC-C009 uses the HMC525 die. Best advice is to ensure the Phase length of IF! and IF2 are matched.
S-parameters for the HMC-ALH476 are available on the HMC-ALH476 product page of the analog.com website. See link below:
Use of a text editor to open the S-par…