• ### How to calculate the measurement accuracy of ADXRS290 and ADXRS450?

In datesheet，only Sensitivity of LSB/°/sec is given.(200 for 290 and 80 for 450)

Can you give an example of calculating the measurement error by measuring a certain value, such as 10°/sec?

Thanks a lot.

• ### one external diode and one external inductor for three ADXRS450s

I am going to use three ADXRS450s on my board. Can I connect VX pin of three ADXRS450s together, connect CP5 pin of three ADXRS450s together, and just use one external diode and one external 470uH inductor?

• ### one external diode and one external inductor for three ADXRS450s

I am going to use three ADXRS450s on my board. Can I connect VX pin of three ADXRS450s together, connect CP5 pin of three ADXRS450s together, and just use one external diode and one external 470uH inductor?

• ### ADXRS450 蓝牙 应用 节能

你好！

谢谢了！

20200521

float GetGyroYaw(float IMU_T)
{
short res=…

This question has been assumed as answered either offline via email or with a multi-part answer. This question has now been closed out. If you have an inquiry related to this topic please post a new question in the applicable product forum.

Thank you,
• ### RE: ADXRS450 Request error, PLL failure, Nonvolatile memory fault (NVM)

This question has been assumed as answered either offline via email or with a multi-part answer. This question has now been closed out. If you have an inquiry related to this topic please post a new question in the applicable product forum.

Thank you,

Q1 ) What is the range of inductor values suitable for 3.3v power supply? it recommends 540uH but what about using 680uH one?

Q2) I am going to use a shielded inductor for my application but lowest cost one is 540uH with 30% tolerance (Automotive grade…

• ### RE: ADXRS450 Digital Gyroscope : Needing help to generate 24V on CP5.

This question has been assumed as answered either offline via email or with a multi-part answer. This question has now been closed out. If you have an inquiry related to this topic please post a new question in the applicable product forum.

Thank you,
• ### Help ADXRS450 5V and 3.3V power

Hello

For ADXRS450 gyro, is it possible to possible to provide 5V for boost regulator and 3.3V for others as shown in image? The intention is to reduce the noise on power supply plane due to switching regulator.

Since output of 5V and 3.3V sources are…