Just 2 small questions oncerning the ADV3229
- Is it possible to send 1 input to the 8 outputs?
- Concerning the EVAL boad, the user guide only mentions WinXP. I presume newer Win is also supported (Win7 / Win8/ Win10)?
Who can tell me where download the ADV3229 Evaluation Board design data for sch, pcb ,regisiter files ?
Am working with ADV3229 crosspoint switch. my problem is, it is not able to get the video out (not switching). All the voltages are correct and schematics i used is same as EVM schematics. I am able to program the device using SPI, this i confirmed…
I am using ADV3229 for switching the Video signals data send over SPI protocol[Serial Programming mode].
The 40 bit value to switch the I/P 0 to O/P 0 is 0x00,0x00,0x00,0x00,0x10.
UPDATE and CE pins are toggling with repect to timing diagram shared…
We have an ADV3229 eval board and the software is running on a computer with Win XP OS. It does not appear to be recognized by the computer. We get no errors when pressing the radial buttons. We get no errors even with the USB disconnected.
Attached are the evaluation board schematic, BoM and evaluation board software which will support the development of systems using the ADV3228 and ADV3229.
The documents and software supporting the development of systems using ADV3224, ADV3225, ADV3228 and ADV3229 can be downloaded in these links:
ADV3224_3225 Design Support Files
ADV3228_3229 Design Support Files
As confirmed by the designer of the ADV3228, the absolute maximum potential difference of DVCC to AVEE is 11V. This applies to other crosspoints such as the ADV3224, ADV3225, ADV3226, ADV3227, and ADV3229. We'll update the datasheets and…