Dear Sir,

We have designed a board with ADV3200 and power supplies for this is VPOS:+2.5V & VNEG: -2.5V, and moment we power on the board, -2.5V is becoming 0V,

Even though there is now short and our power source is capable of sourcing 1A current…

Hi,

From datasheet of ADV3200 I see that is possible to have Multicasting, so is possible to map to two or more output ports the same input port? or this device support only a 1 to 1 connections?

regards,

Dario  

Hi,

From datasheet of ADV3200 I see that is possible to have Multicasting, so is possible to map to two or more output ports the same input port? or this device support only a 1 to 1 connections?

regards,

Dario  

Can ADV3200 and ADV3201 DVCC be equal to 3.3VDC?

I can't find this information on the datasheet and on the eval board documentation DVCC is 5V. 

Thank you for your support

Best Regards

Marco 

Hi, 

I am using ADV3200 in one of our PCB design with supply requirement of +2.5 and -2.5V (input signal is ranging between +1.7V to -1.7V) . Few questions;

• What is the max current consumption by the IC, from the datasheet it seem like the idle current…

Hi,

If I use the ADV 3200 with single supply at 5V, which is the logical level for digital I/O? In datasheet I see that is present the table with the value for 3V3 digital supply but I can't find the one for 5V.

moreover, is possible use 5V to supply…

Hi,

with one rail(5v) power supply (5V on Vpos and 0 on Vneg), the bypass capacitor of VNEG (that is at GND) are no more necessary?

regards,

Dario