The datasheet suggests that Vsel has a weak pull-up, which should result in the selection of 5v output. This does not appear to be the case, the output is 3v3 and measurement of the pin give 0v with a multimeter and a flat 0v with x10 scope probe.
The Datasheet is not quite clear to me as far as Table 13 goes:
I will operate the device in Master mode with 5Vin and 5Vout (first line in Table 13) and with RCsel=H and RCin=X (don't care??).
Second-last line gives Details on low-power…
I have an ADuM5000 that I want to run the input at 3.3V and get 5V at the output. The data sheet says this is not recommended, but I tried it on the bench and it made 5V, can I use it this way.
Can RCout pin of ADUM5000 connect to some small capacitor?
thank you very much~
I assembly the circuit according to the manual and used a mouse to make a test.
In Windows XP SP3 works and does not work on Windows 7 64-bit Professional.
How do I turn a single ADuM5000 on and off from a 3.3 Vdigital output. Do I need to tie RCsel, RCin and RCout all low? Does it need tobe ‘Open collector’ with a transistor/fet?
The CN0349 hardware is no longer available for purchase.
However, the power dissipation can be calculated by adding up the contributions of the various components as taken from their respective data sheets:
AD5934 @ 3.3V: 15mA
AD8606 @ 3.3V: 2.8mA
what'is the consuption in current of ade9153a?
can i use ADUM5000 dc dc isolator (3.3 to 3.3 isolated) to feed ade9153a and ADUM4152 (spi isolator)?
IOUT MAX =60mA ADUM5000