I have a board design like the following. I do not use USB, so the USB pins are connected to the GND. I know in the manual shows that they need to be pulled low if not using.
My question is that what will happen if they are tied to the GND directly…
For CM409F, is there a way to change the PWM default pullup state during reset. see undesired initial pulse in the pic attached.
I am interested in creating a new design with one of the following two ADI microcontrollers:
1) ADSP-CM407F: 2MB flash, 384KB SRAM
2) ADSP-CM409F: 2MB flash, 384KB SRAM
I would like to use the microcontroller as follows:
1) The microcontroller…
Sorry,I'm porting project from ADSP-21489 to ADSP-21571.
The SAM board is designed around the ADSP-SC589 SHARC processor, so it does not support the new ADSP-2156x (GUL) processors. To evaluate the GUL processors, we recommend using the ADSP-21569 EZKIT evaluation platform.
A final check,
This path down to the Cores (default project copy from examples) does not work:
C:\Users\Bengt Nilsson\cces\2.9.2\examples\sigmastudioforsharc-adspsc5xx.sharc_4.5.0\Demo-App\Demo\ADSP-SC58x\ADSP-SC589\SS_App_Core1 (134)
this still does not…
Hello, We would suggest you to refer the ADSP-BF526 EZ-Board®Evaluation System Manual and ADSP-BF527 EZ-KIT Lite®Evaluation System Manual form below mentioned link.These manuals has reference schematic with BOM. It would be helpful for your implementation…