• Performance comparison of FIR/IIR accelerators between ADSP-SC584 and ADSP-21489

    Hi,all,

    I want someone to help me to confirm the performance comparison of FIR/IIR accelerators between ADSP-SC584(450MHz) and ADSP-21489(350MHz).

    The accelerator I tested is FIR accelerator.And the parameters are: TAPS =512,WINDOWSIZE = 16,Channels 

  • Can the CRC engine on ADSP-SC58x/ADSP-2158x be used to calculate 16 bit CRC ?

    No, the CRC engine on ADSP-SC58x/ADSP-2158x can't be used to calculate 16 bit CRC. The reason being that the CRC engine on ADSP-SC58x/ADSP-2158x has a 32 bit engine and thus assumes the polynomial to be of the order of 32 bit. There is no way to program…

  • RE: ADSP21489 EZKIT example programs

    Hi ,

    Can you please have a look at the example available in the ADSP-21489 Board support package(BSP) to check the DSP. Please download and install the board support package for ADSP-21489 in the below download.analog.com/.../ADI_ADSP-21489_EZKIT-Rel1…

  • RE: ADSP-537 Is there an example of using UART DMA and a circular receive buffer?

    Hello,

    As this UART Loopback Auto buffer mode code has tested with the ADSP-BF533 processor. In order to test this in ADSP-537, you would need to port this code for ADSP-BF533, meaning that you have to make a necessary changes in the code W.R.T ADSP-537…

  • ADSP-SC5xx/ADSP-215xx

    EngineerZone technical forum that provides customer support for Analog Devices ADSP-SC5xx/ADSP-215xx products.
  • Getting Started with ADSP-CM40x Mixed-Signal Control Processors

     

    ADSP-CM40x Mixed-Signal Control Processors

    The ADSP-CM40x offers new levels of industry leading mixed-signal performance with a 240MHz core clock – an industry high for ARM Cortex M4 – and dual SAR 16 bit, no missing codes A to D converters with 380ns…

  • FAQ: List of Processors supported by Command Line Simulator

    Question:

    List of Processors supported by Command Line Simulator

    Answer:

    Functional Simulator:
    ADSP-BF70x
    ADSP-BF716
    ADSP-21573
    ADSP-21584
    ADSP-SC584
    ADSP-SC589

    Cycle-Accurate-Sim:
    ADSP-2157x
    ADSP-2158x
    ADSP-SC57x
    ADSP-SC58x

    For more information please…

  • In-circuit programming of ADSP-BF706

    Hello.

    I have EV-DEMORAD24G (FMCW radar evaluation bord) which use ADSP-BF706.

    For developing software, I want to know how to program the firmware into SPI flash memory.

    The  SPI flash memory is connected to SPI2 port of ADSP-BF706.

    ADSP-BF706 boot mode…

  • RE: Simulating ADSP-21479

    Hello,

    Please note that the Command Line simulator(Chipfactory.exe) will support the below processors only.

    Functional Simulator:
    ADSP-BF70x
    ADSP-BF716
    ADSP-21573
    ADSP-21584
    ADSP-SC584
    ADSP-SC589

    Cycle-Accurate-Sim:
    ADSP-2157x
    ADSP-2158x
    ADSP-SC57x
    ADSP-SC58x

    For more…

  • DAC on ADSP-CM408F Controller

    Hello,

    I want to know if DAC of 12 bit is present in the ADSP-CM408F microcontroller. Looking at the datasheet and user manual which has been written for ADSP-cm40x controllers it is mentioned that there are no DACs availoable for this particular controller…