this error message is autogenerated by my code if you are using a target which is not supported. Are you running a ADSP-BF538 session?

  • RE: PPI data Transfer

    Hello Anand.

    The PPI is only accessible via DMA, so there are no dedicated data registers for the core to access. I do not have any example program for the BF538 that you are specifically asking about, but there are many video examples included with…

  • ADSP-BF538 SPORT - External Clock

    If Serial ports are configured to use external clock, what happens if we cut off external clock signal ?
    Does DSP provide any kind of notification that external clock signal is not active like interrupt or status bit updates.

    Thank You

  • RE: What is the maximum DDR size that BF54x can support?

    The data sheet is pretty clear on that: 128MB. Just look at the Figure 3  Internal/External Memory Map

    The HRM is still under review and the numbers (512MB) are wrong. It is 128M for the ADSP-BF52x Blackfin processor family.

  • BF518F Kit Lite Related

    Can the Blackfin Landscape EZ Extender be used with BF518 Kit Lite also. In the information related to LCD extender, its been mentioned as

    Blackfin Landscape LCD EZ-Extender for the ADSP-BF526, ADSP-BF537, ADSP-BF538, and ADSP-BF548 EZ-KIT Lites.


  • RE: BF538 PPI first data is missing

    The PPI interface now works well. Initially I supposed that the FS signals are sampled on the opposite edge as the data are driven. I didn't find these information in the ADSP-BF538/ADSP-BF538F Blackfin  Processor Hardware Reference rev. 1.2 datasheet…

  • RE: Tristate flag pin

    Yes all GPIO pins on the BF538 can be tri-sated by changing the direction from output to input.  Registers for each pin are listed in chapters 14 and 15 of the Hardware Reference Manual.
  • RE: BF538 SPORT Multichannel Operation: External RFS

    Can someone from analog devices confirm that we should be pulsing the RFS high only at the beginning of the frame and not holding it high during the frame?
    >> The first bit of the transmit data word is available and the first bit of the…
  • 2008-02-25 22:46:15     uClinux on bf538-ezkit?

    2008-02-25 22:46:15     uClinux on bf538-ezkit?


    Message: 51637    Hello!

    Is it possible to invoke uClinux builded on distro`s source codes on bf538-ezkit?

    There aren't any bf538 items in the kernel config menu. Witch simplest…

  • RE: What is the procedure to erase and program ADZS-BF527-EZKIT LITE eval board?

    I am using Visual DSP++ 5.0. There is no folder with the name  ADSP-BF527 EZ-KIT Lite in the path as you told  ........\Analog Devices\VisualDSP 5.0\Blackfin\Examples\ADSP-BF527 EZ-KIT Lite\Flash Programmer. I can only see folders with BF533, BF535, BF537…