i want to connect visualdsp++ 5.0 and adsp-bf537 together by creating a session but in the visualdsp++ configurator window adsp-bf537 isn't listed as a device in the devices list, so how could i add adsp-bf537 as adevice? could any one help me ,please…
The VisualDSP++ examples for BF537 CAN are stored in these locations in a default installation:
C:\Program Files (x86)\Analog Devices\VisualDSP 5.0\Blackfin\Examples\ADSP-BF537 EZ-Kit Lite\CAN Receive (C)
C:\Program Files (x86)\Analog Devices…
I've recently got a new batch of boards in where after programming them, I've noticed a warning in the boot dialogue that the OS was compiled for hardware revision 3, but was running on 2. I've looked at the silicon anomaly list for the BF537 but have…
16 MB SDRAM
Started with E:\Analog Devices\CrossCore Embedded Studio 2.8.2\Blackfin\ldr\init_code\BF537_init\ezkitBF537_initcode
Modified SDRAM settings.
Modified project to load to…
there is a pure C example available for the ADSP-BF537 which you could port to the ADSP-VF504F.
I've bought the DSP and IMU in question, and am utilizing ucLinux in development. I've got the SPI up and running (CPOL=1, CPHA=1), and I assume it is working OK. I've got a few questions though in regard to the communication protocol:…
How can i implement floating point support in VDSP5.0++? I'm using an ADSP-BF537.
Is it just inlcuding the "float.h" header-file?
I should use floating point variables in a range from +100000 to -100000.
And is there…
I am trying to boot the BF537 EZlite kit through the UART boot mode. for this i have changes the SW16 on the board to position 7. in the cross core tool chain i have selected the the following and project options and build the LDR file.