• RE: C UART Library?

    Yes that was the reason why I couldn't build the project. The "ADSP-BF537_FAMILY-UART_basiccrt.s" was successfully generated, however, upon rebuilding the project, this error came out:

    ----------------Configuration: ADSP-BF537_FAMILY-UART…

  • RE: compress and decompress in VisualDSP++

    Hi,

    From the tools perspective, the Loader supports compression using the ZLib compression engine for some of the older Blackfin processors (BF53x), with example decompression DXEs and further information available in the VisualDSP++ installation under…

  • BF534 spurious stack overflow.

    Hi,

    We are having problems with a BF534 running a VDK-based C++ application. Basically, at (fairly rare) random intervals it crashes, locking up with a stack overflow. The system stack is currently 16k, and I have tried both 8k and 32k, and the frequency…

  • BF534 sdram expansion

    customer is running out of SDRAM space on a BF534.  datasheet says can run up to 512M byte without any glue logic. Is it feasible to use multiple devices with the '534 since it has only one /SMS output?

    Currently we are using a Micron MT4816LC16M16A2…

  • BF534 Clock Buffer

    We noticed that the BF534 has a CLKBUF pin which is a clock output that is connected through a PLL and the CLKIN pin. We would like to use just a single 25MHz oscillator connected to the CLKIN and be able to use the PLL to get a 50MHz clock out on CLKBUF…

  • Does the BF537 really have 3 16-bit MACs?

    According to the datasheet for the BF537/BF534/BF536 each chip is able to support three 16-bit MACs, but the Analog Devices spreadsheet comparison tool states:

    BF534     500MHz     1000MMACS

    BF536     400MHz     800MMACS

    In fact, the details for the BF537 are all…

  • TAGS LIST: Blackfin Processors

    LABVIEW_EMB_BF
    LABVIEW-SBF
    TOOLS-MISC
    ADSP-BF504
    ADSP-BF504F
    ADSP-BF506F
    ADSP-BF512
    ADSP-BF512F
    ADSP-BF514
    ADSP-BF514F
    ADSP-BF514F16
    ADSP-BF516
    ADSP-BF516F
    ADSP-BF518
    ADSP-BF518F
    ADSP-BF518F16
    ADSP-BF522
    ADSP-BF52…
  • regarding AN-813: Interfacing the ADSP Blackfin Processors to High Speed Parallel ADCs

    I really want to know:

    one page 1, figure 1, PPI0_FS1, PPI0_CLK, for following Blackfin processors, do I need external LOGIC?

    BF538, BF542, BF547, BF548

    This figure is confusing: it said BF534/6/7 but said BF534/5/6 in two difference places? what a…

  • RE: Question about silicon revision

    Hi Lloyd,

    I have tryed this, but I am using SPI boot method. Apparently the lower silicon revisions doesn´t support boot via SPI.

    Sorry I have forgot to mention that.

    The compilation will fail as follow:

    [Warning ld0079]: Ignore programmable flag…

  • RE: Possible compiler bug.

    I should add that I am developing for the BF534 on a custom board.

    Peter.