• FAQ: ADSP-BF527 Multi dxe boot

    Attached is the Multi DXE boot code for ADSP-BF527 Ez-Kit.

    There are two different LED blink application is available, one of which resides in the boot flash (start address: 0x20004000) which will blink three LEDs in the EZ-Kit continuously if the same…

  • ADSP-BF527 EVK

    Hi there,

    is ADSP-BF527 eval kit (EVAL-BF527-EZLITE)

    obsolete? if yes, which EVK can be used to evaluate BF527 performance? or should i use another newer part from BF family?

    Thanks and BR,

    Keddy 

  • 2011-01-31 16:12:56     USB webcam with ADSP-BF527

    2011-01-31 16:12:56     USB webcam with ADSP-BF527

    Ashish Gupta (INDIA)

    Message: 97814   

    Hi,

    I was wondering if anyone has used a webcam with BF527, (Ezkit or custom HW). If someone has already tested webcam/s on BF527 using uclinux, it'll be great if…

  • 2010-05-19 03:16:58     USB keyboard mouse in ADSP-BF527 EZKIT LITE

    2010-05-19 03:16:58     USB keyboard mouse in ADSP-BF527 EZKIT LITE

    judith tang (HONG KONG)

    Message: 89533   

    I am now developing a controller which can process USB keyboard / mouse message and then put them into TCP/ UDP packets. Can anyone give me directions…

  • RE: ADSP-BF527 specific libgloss

    This question has been assumed as answered either offline via email or with a multi-part answer. This question has now been closed out. If you have an inquiry related to this topic please post a new question in the applicable product forum.

    Thank you,
  • bfrom_SpiBoot using Revision .1 vs .2 (BF527)

    The API bfrom_SpiBoot works with .2 of the die for the BF527.  But, when the same code is loaded onto a Revision .1 API does not return it is in a loop @ 0xEF000486.

    Is there a difference in the API between the two revisions?  The source is only available…

  • RE: USB Example for ADSP-BF527 Unstable

    This question has been assumed as answered either offline via email or with a multi-part answer. This question has now been closed out. If you have an inquiry related to this topic please post a new question in the applicable product forum.

    Thank you,
  • RE: ADSP-BF527 EZ-KIT lcd interface help

    This question has been assumed as answered either offline via email or with a multi-part answer. This question has now been closed out. If you have an inquiry related to this topic please post a new question in the applicable product forum.

    Thank you,
  • RE: BF527 SPI enable

    Hi Shai,

    We understand that you aware of the SPI_CTL register is used to configure and enable the SPI system. While running the SPI code the SPI_CTL is shows that SPI is disbled.  Please correct us if our understanding is wrong.

    Please note that the SPE…

  • 2010-07-26 07:49:16     Issue in direct-fb porting onto ADSP-BF527 reference EzKit - reg

    2010-07-26 07:49:16     Issue in direct-fb porting onto ADSP-BF527 reference EzKit - reg

    Moses K (UNITED STATES)

    Message: 91726   

    We are trying to port direct-fb (1.2.7 ver) on to BF527 EzKit.

    In the process, we have enabled direct-fb build options in…