• ADSP-BF518 Dynamic mode IP configuration support req.

    One of my Client is planning to use ADSP-BF518 in an network and now they are facing an issue in IP configuration.Here the problem is for each and every board of ADSP-BF518 they are programming separately with Static IP which is creating a problem in…

  • ADSP-BF518F16与ADSP-BF518区别?

    在BF518BF16页面下找到的硬件参考手册当中,封面上写的是Includes ADSP-BF512, ADSP-BF514,ADSP-BF516, DSP-BF518,没有包含518F16 ,也没有勘误表

      请问BF518的硬件参考手册和BF518F16有区别吗?

    硬件参考手册能使用同一个吗?

  • ADSP-BF518 MP3 codec

    ADSP-BF518 MP3 codec is not supporting for all frequency of audio signal. Request to share if there is any reference code which can help to process audio signal working in Any frequency 

  • RE: Using SRAM for code with ADSP-BF518

    Hello,

    Firstly, can you please confirm that the code is running as expected using emulator?

    Please note that when you connect to a target via a JTAG Emulator or Debug Agent, the default behavior is that the Emulator will check a corresponding XML file…

  • RE: SM2602 CODEC Driver for the ADSP-BF518 EZkit

    Sorry for all the posts, but as I was wrapping up the session and pressed PB2, the program stopped running (as it should), but I was still listening to the music (left channel, as before).

    So, probably, all the time I was able to hear something, it was…

  • Porting JPEG example to ADSP-BF518

    I installed the ADI jpeg software module for blackfin.

    I then tried to port the JPEG_Enc_FileIO_BF527 project to the BF518 device.

    I keep getting the following error:

    C:\Program Files (x86)\Analog Devices\VisualDSP 5.0\gmake-378: *** No rule to make…

  • RE: Using the e-MMC on the ADSP-BF518 EZ-Kit

    Yes, it will include support for the ADSP-BF518F EZ-Board.  You will be able to find the examples in Update 7 in the following directory:

    .\Blackfin\Examples\ADSP-BF518 EZ-Board\Services\File System\RSI\eMMCFormat

    We are planning to release VisualDSP…

  • Can I obtain schematics for rev 0.2 of the ADSP-BF518 EZ-BRD?

    I have a rather old-ish ADSP-BF518 EZ-BOARD with REV 0.2 on the silkscreen.  The schematics in the manual are for rev 1.0.  They show a single ethernet port whereas this board has 2.  Can you please tell me how I can obtain schematics for this older rev…

  • RE: how to configure the output of PTP_PPS on ADSP-BF518 chip

    Hi Charles,

    We have an example of PTP for BF518 available with the VDSP Installation, in the path "VDSP Installation\Blackfin\Examples\ADSP-BF518F EZ-Board\LAN\PTP\BF518". In case you have not tried this already, please take a look at the codes available…

  • ADSP-BF51x-UART example program in ee347  for  BF518

    I configured uart 0 for bf518 properly in code and hardware.

    And changed bfdebugger.h as below.It is printing to console .What i need to change to print to uart.

    #define __UART_IO_DEVICE__          1   /* Extend I/O support to a new device: Uart */
    //#define _…