Good day! I have simple question about ADSP-21573/ADSP-SC573. Can external memory controller of ADSP-21573 and ADSP-SC573 work with external SRAM? There is some SMC - this is what we need or it's for something else? We need an analog of AMI from 489 family…

Dear All

where can I find Device Programer for ADSP-21573?

I have tried to use the one form SC573 (sc573_w25q128fv_dpia_Core1.dxe) but the flashing stacks without error.

Thanks in advance

Goran

I don't find in Sigma Studio for Sharck the sw related to ADSP-21573. Is supported this component ?

thank you.

F.

你好，

我使用了adsp-sc5xx_ez-kit评估板来调试SPI + DMA。从MCU接收数据，该MCU可以生成DMA中断，但不能接收DMA数据。

以下是MCU发送给DSP的数据波形：

可以产生DMA中断，但是RxBuffer中没有数据。

附件是我的代码。你能告诉我问题是什么吗？

最好，

凯文

Customer ask some questions.

Right now we have  plenty of software for ADSP-21489, but it’s quite hard to port it to ADSP-SC573 family. Code itself

is 99% C and C++.

Does family ADSP-SC573 have interface with external static memory like AMI for ADSP…

I used the adsp-sc5xx_ez-kit evaluation board to verify that the second-stage loader function，and it can work properly.

I referred to the demo(SC573_SSL.zip) in the url. ADSP-SC572 Second stage loader won't boot main app with ad-_rom_boot()

However…

Hi,

I had a problem with the custom board (adsp-21573 +MCU) simulation.The simulator type is ice-1000.

When the board is powered on, MCU controls SYS_HWRST pin and reset DSP.When I start debugging for a while, CCES will pop up the warning "Timeout waiting…

Hi,

I am using ADSP-21573 custom board and CCES2.8.2 for product development.

An unknown error occurred in the program, and the error location could not be found.

Can a hardware interrupt occur when an unknown error occurs?

Hi,

I just created a new project in CCES 2.5.1 for ADI-21573 platform. Then I wrote a sample application which reads the contents of a file and displays it. This was working fine. The LDF file was automatically generated for this application. Then I…

What is the best way to interface 2 ADAR7251 chips to an ADSP-21573 so as to allow the maximum sample rate of 1.8 MS/s?