• Building U-Boot for the ADRV9364-Z7020

    I'm trying to build U-Boot for the ADRV9364-Z7020 evaluation kit from the latest u-boot-xlnx (xilinx-v2021.2) sources because I need some configuration modification and also the Kuiper image BOOT.BIN file doesn't have a U-Boot build that supports the…

  • Linux Kernel defconfig for ADRV9364-Z7020 + ADVR1CC-BoB

    Hardware: ADRV9364-Z7020 + ADVR1CC-BoB

    Question: From this link in the 'Configure the Kernel' section it is required to follow this step;

    dave@hal9000:~/github-linux-build/linux$ make zynq_xcomm_adv7511_defconfig

    My question is - does the above…
  • Ethernet Transceiver U10 on ADRV9364-Z7020 SOM - Is this Industrial or Commercial spec part?

    I'm trying to find out if the Ethernet Transceiver chip (U10) on the ADRV9364-Z7020 SOM is an industrial or commercial spec' part. The part number provided in the BOM provided by Analog Devices (link below) is incomplete.
     
    BOM:  https://wiki.analog…

  • ADRV9364-Z7020 support/clarification needed - bad documentation and links

    We have bought a ADRV9364-Z7020 + the PicoZed BoB

    I have spent close to two hours trying to ascertain just few basic things. I'm no longer sure if I still have the correct info and so am posting here to clarify.

    1)  My very simple question is are…

  • Viewing Boot Messages on the USB UART on the ADRV9364+ADRV1CCR-BOB

    After finding the windows driver for the CP2103 chip on the USB UART port P14 on the ADRV1CCR-BOB, I can run it through a boot cycle and watch what should be characters stream out over the COM port.  However, the characters are unintelligible jibberish…

  • RE: ADRV9364 appconfig.h

    Hello,

    There might be a bug with the IRQ part of the project. I haven't been able to look at it yet, but I am planning to do so in the near future.

    Regards,
    Andrei

  • Switch in ADRV9364-Z7020

    Hello

    I am trying to run a simple example on the FPGA of the adrv9364-z7020 + bob board

    where the switches S1 and S2 of the bob board work as inputs and the led gpio0 as output.

    I find that the switch on the bob board is related to one of the JX connectors…

  • Satellite Communication Using ADRV9364/61

    I was looking into satellite communication aspects using ADRV9364/61, I know it isn't designed for space applications It seems that there is some limited support in terms of bands. I want to access QO-100 satellite or may be some other satellite if you…

  • ADRV9364-Z7020 marking

    Hi. I have a question about ADRV9364-Z7020 marking. Serial numbers and Lot number are different on the board (S19-1585 SN: 00130) and on the label (S20-0730 SN: 2020080300802). Is this acceptable? or is it a delivery error?

  • ADRV9364-z7020 evaluation board custom device tree

    Dear all,

    I have an ADRV9364-z7020 evaluation board and I'm trying to build without success a Linux image by using a customized device-tree through Petalinux v2021.1.

    After following the steps described in this Link about how to add a custom devicetree…