Hi, I am trying to configure the ADRF6801 and after reading the data-sheet, it seems that there is no specification of the Register 7. The text describes that Register 7 should be configured first, but there is no documentation about this register.
I am trying to program ADRF6801 Evaluation boards with USB programmer module (RFL USB Adaptor). I am using "ADRF6x0x_customer_6p1p0" software with ADRF6801 selection option. It seems that pin configuration for the programmer module do not match with ADRF…
Is there any documentation or quick-start guide for getting the eval board up and running?
we have designed a receiver based on ADRF6801 Quadrature Demodulator and we have a sort of problems with its SPI programming:
1-Register 4 shows an unusual behavior " when we write this register to its any valid combinaton which defined in datasheet…
I have purchased an ADRF6801 evaluation board. I would like to simulate the loop filter design using ADIsimpll software. Unfortunately ADRF6801 is not in the PLL chipset list of the software. Is there a workaround for this? Is there a possibility…
I'm using an ADRF6801 demodulator in combination with an ADRF6701 modulator.
I want to monitor junction temperatures of both chips, so the chips were configured to use the VPTAT temperature proportional voltage output at the MUXOUT pin.
As newer products were released the SW was updated. Please click on the link below for the ADRF6801 and load the software and drivers. This will include the updates for the ADRF6601 as well.