• ADRF5045 DC coupled

    Dear Analog,

    i'm using ADRF5045 for a tunable filter bank prototype.

    in the datasheet i have seen that every output of the SP4T is DC coupled.

    is it dc coupled to 0V?

    i need to connect a diode varactor at  the ouput of every channel (SP4T) and for…

  • ADRF5045 Raise and Fall time

    Hi, 

    Do you have any information with regards to rise and fall time? 

    The mask Margin is very less when check on Evaluation board .

    Thanking you 

    With best regards and wishes 

  • Bias sequencing question about ADRF5045-evalz

    Hello, I have a question about bias sequencing problem of ADRF5045.

    From the data sheet, ADRF5045 bias sequencing follows 1. GND, 2. VDD, 3. VSS, 4. control voltage before the input.

    And i simply followed the sequencing, but the components keep dying…

  • 射频开关

    我公司预使用ADI两个开关产品，一组：ADRF5044/ADRF5045 二选一；二组：ADRF5020/ADRF5021二选一；现想咨询一组和二组开关可否级联使用？谢谢

  • 射频开关咨询

    我公司预使用ADI两个开关产品，一组：ADRF5044/ADRF5045 二选一；二组：ADRF5020/ADRF5021二选一；现想咨询一组和二组开关可否级联使用？谢谢

  • RE: HMC547ALP3E RFC connected to HMC641ALP4E RFC with no AC coupling cap, weird insertion loss behavior

    Hi BrendanT,

    I see you have DC blocking caps on the RF lines connecting this block to the previous and next block.
    The RF ports are DC coupled to 0V and these connect to the drain/source of the RF transistors. As long as your control signals are clean…

  • TAGS LIST: Switches/Multiplexers

    AD8104
    AD8105
    AD8106
    AD8107
    AD8108
    AD8109
    AD8110
    AD8111
    AD8112
    AD8113
    AD8114
    AD8115
    AD8116
    AD8117
    AD8118
    AD8175
    AD8176
    AD8177
    AD8178
    AD8186
    ADV3200
    ADV3201
    ADV3202
    ADV3203
    ADV3205
    ADV3224
    ADV3225
    …
  • PPTX

    6/3/2021 Reducing Design Complexity and Development Time with LO and Clocking Signal Chains

    • RF Webcast (Kayla)_Final.pptx
    • View
  • PPTX

    6/3/2021 Reducing Design Complexity and Development Time with LO and Clocking Signal Chains

    • RF Webcast (Kayla)_Final.pptx
    • View

  • RE: 36GHz RF oscillation signal source

    You need a PLL which drives a frequency doubler which drives an amplifier. Possible choices might be ADF4371 (PLL),  HMC1105 (frequency doubler) and HMC7229 (amplifier). These are not the only choices.

      PDF