One of my customer is considering ADR06.
The capacitive load would be 4uF. Can ADR06 drive it?
Should they use buffer amplifier?
If you have advice, it is helpful.
I want to use AD5449 in my design. The REF pin must be provided the external reference input, while the input resistance of REF pin is 11K ohm. The datasheet suggest to use ADR*** to generate the reference input, like ADR06(output current is 10mA…
One of my customers has one problem with ADR03 output adjustment range.
Part of his circuit schematics is attached.
As shown in the schematic, Vout adjustment circuit is almost the same as shown in the data sheet, Figure 35.
He said that the…
If you are using or plan to use the AD5415 12-bit DAC chip in a daisy-chain configuration, you need to read page 20 of the marked up data sheet attached. If you are using the SDO output of even a single AD5415, then you also need to see the erratum marked…
I'm working on a design that includes the AD7997, the ADCMP393 and the TI LM2902 and am seeing inconsistent and inaccurate voltage reads from the AD7997. I am trying to determine how to rectify this and produce stable and accurate reads from the AD7997…