Can you provide an example or some reference design aobut the ADP3654 driver?
I want to use it to drive two separate P-Mosfet in an high side switch application (+8V and +5V).
thanks
Browsing the ADP3654 dual FET driver data sheet, I noticed some discrepancies. Thinking it was my interpretation, I then browsed the AnaDev site. Lo and behold, right at the bottom of the webpage is a review with similar issues. There was no reply to…
Hello
Do we have ADP3654 ESD specification to customer? Thank you.
BR
Patrick
请求基于ADP3654的MOS驱动参考设计，INA可接入多少频率的驱动信号，OUTA，输出是什么波形
Dear Analog Devices,
I am building a D class headphone amplifier and I thought of using the above gate driver IC, but in a configuration where it directly drives the load (an LC filter and the headphone itself) as the device already contains a reasonable…
Unfortunately, ADP3654 can't be used for half bridge topology to drive the top and the bottom MOSFETs. The isolated drivers are the ones we have for half bridge topology.
Dear All:
LTC1693-5 is ADI only P-channel mosfet gate driver solution ,but this is single channel ,ADI have dual channel solution compare ADP3654 design architecture .can you provide spec. to me refer. thanks
best
Jack
Hello,
The ADP3654 is not meant for continuous operation at 2A current. It will not be able to sustain a DC current of 2A for long and will get hot. It will still be able to sustain it in my opinion but a more elegant solution is to simply use a V to…