Hi Sonya,

For the ADV7612 on EVAL-ADV7612-7511, I used an ADP1715-3.3 to generate 3.3V from 5V and an ADP1715-1.8 to generate 1.8V from 5V.

I don't think we've had any issues with this approach, but the 5V to 1.8V is quite a large voltage drop, so on…

Hello, Guenter!

Please explain what is the difference between ADV7612 and ADV7511 power supply requirements?

Why on EVAL-ADV7612-7511 board power supplies for ADV7612 and ADV7511 are also different?

1). Why for ADV7612 1.8V and 3.3V power supplies…

Sergei,

a good way to find that function is to use ADIsimPower

Enter your design parameter (for example I would like to know what your input voltage is) and the tool will give you a list of the available parts. You can select Adjustable soft start from…

hi Nabeel

i read ADSP-BF506_EZ-KIT_Lite_Manual_Rev.1.0 carefully and see there diffrent circuit in page 72,but i cant found many parts in my country such as (AD5258 MSOP10 , ADP1715 MSOP8 , ADP1864AUJZ SOT23-6 , SI4411DY SO-8)

a want to know if i generate…

Hi,

Please refer below table and make sure the default Audio output port mapping.

You need to connect the I2S0 to AP1 pin but you have connected like I2S0 to AP0. Please refer our schematics for more details at 7343.EVAL-ADV7612-7511_rev0p1_schems.pd…

Hi,

 Our Eval board schematics is under 7343.EVAL-ADV7612-7511_rev0p1_schems.pdf.  Please crosscheck with that.

 Please refer Page11 for POWER SUPPLY SEQUENCE in ADV7612 datasheet.

Thanks,

Poornima

For the schematic, you are missing SOG and SOY connections.  If the graphics input is only from the VGA output that contains H&V then you don'[t need the SOG connections.  However you must have SOY if you are connecting to a component source.

Also…