• RE: How to set the resistors to make ADP 5090 runs from 2.2V to 2.5V without battery.

    maybe you can try ADP5091 that includes additional regulated output even if the battery higher than 2.5V.

    another one is boost regulator ADP1607.

  • ADP PFM mode

    ADP1607

    In the datasheet is said:

    In PFM mode, the converter only switches when necessary to keep the output voltage between the PFM comparator high output voltage threshold and the lower sleep mode exit voltage threshold. Switching stops when the upper…

  • RE: i wants to make an DC voltage amplifier

    Atul,

    As Bob suggested this is some related to power management.

    The ADP1607 boost regulator can generate a bias voltage (2.5V) for another boost regulator like the ADP1612.

    In this case the the ADP1612/13 can boost to 3.3V or 5V from the battery by…

  • RE: boost + LDO

    Hello,

    This looks like a very good application for the ADP162.  I would also include a ferrite bead pi filter before the LDO to try and eliminate some of the high frequency switching noise from the boost converter.  I assume you are using the ADP1607 as…

  • RE: ADAU1461 Hardware Circuit

         Hello,

         I'm afraid I don't have your complete solution.  Here's a few ideas:

    • DC-DC Converter:     To power your system, try the ADP1607 boost IC.  The application circuit from its datasheet can convert inputs from 0.8V to 3.3V up to 3.3V. 
  • 智能可穿戴医疗保健设备,您必须考虑的设计要素与挑战

    智能可穿戴医疗保健设备及典型架构

    可穿戴医疗保健设备可定义为能够自动、智能、无创地执行特定医疗监控、支持目的的设备。“可穿戴”一词说明该设备要么直接佩戴于人体上,要么是一件类似于衣服的物品,并且具有适当的设计,支持其用作可穿戴配件。广义上讲,这要求该设备具有极小的尺寸和重量,功能自主,自备电源,易于使用,而且穿戴舒适。

    智能可穿戴医疗保健设备有多种类型,如腕带、手表、眼镜和其他可穿戴类型。执行的功能有计步器、心率监测、运动记录、生物电位测量、生物阻抗测量、血氧测量等等。

    智能可穿戴医疗保健设备是传统医疗设备的延伸…

  • 智能可穿戴医疗保健设备解决方案

    先呈上完整资源包的下载链接:

    http://h.analog.com/CN-APM-WEARABLEff

    智能可穿戴医疗保健设备及典型架构

    可穿戴医疗保健设备可定义为能够自主监控或支持特定医疗功 能的无创式系统。(可穿戴的国家标准正在制定中) “可穿戴”一词说明该设备要么是直接佩戴在人体上的设备, 要么是一件衣服,并且具有适当的设计,支持其用作可穿戴配 件。广义上讲,这要求该设备具有极小的尺寸和重量,功能自 主,自备电源,易于使用,而且穿戴舒适。

    智能可穿戴医疗保健设备有多种类型,如腕带…

  • TAGS LIST: Power Management

    LTM8045
    LTM8049
    LTM4651
    LTM4661
    LTM4686
    LTM4676
    LTM4686-1
    LTM4676A
    LTM4675
    LTM4677
    LTM4678
    LTM8062
    LTM8061
    LTM8052
    LTM8026
    LTM8056
    LTM8064
    LTM8054
    LTM8055
    LTM4600
    LTM4600HV
    LTM4608A
    LTM4604A
    LTM8032
  • RE: adau1772 MCU interface

    Hello okokok,

    Have a look at the evaluation board schematic and user guide. In the user guide there is a short discussion about using the I2S ports. It is a pretty standard way to use I2S. You have to use I2S since there is no way to get audio in and…