• RE: ADN4612 LOGIC SUPPLY

    1. LOS IRQ can only be supported to 1.8V

    2. VTTI supply range = 1.8V (+/-10% tolerance)

    3. VTTO supply range = 1.8V to 3.3V (+/-10% tolerance)

  • Does ADN4612 support 3G-SDI with 75 ohm termination?

    Hello,

    We plan to use ADN4612 as a 3G-SDI cross point  switch with 75 ohm termination cable. I found that 50 ohm internal termination available at source and destination end inside the chip.Does it create any wave effect when i connect standard 75 ohm…

  • RE: ADN4612 in 12G-SDI

    Hi ,

    I notice that this query has been unanswered for some time. is this still an issue for you?

    Regards,

    David

  • Does ADN4612 support 3G-SDI matrix with 75 ohm Cable Impedance?

    Hello,

    We plan to use ADN4612 as a 3G-SDI cross point  switch with 75 ohm impedance cable. I found that 50 ohm internal termination available  at source and destination end inside ADN4612. Does it create any wave effect/signal loss when i connect standard…

  • Does the ADN4612 support 8b/10b?

     The device is described as protocol agnostic but I would like someone to confirm if it supports 8b/10b. The datasheet specifies 64b/66b. If it does support 8b/10b please specify the maximum speed. The device will be used to switch between Serdes…

  • Hellorr, what is the config time (via EEPROM) for the ADN4612?

    Config time (via EEPROM) for the ADN4612?

  • ADN4612 Digital Crosspoint Switch modell

    Hi Everybody!

    Can you send me IBIS or IBIS-AMI for ADN4612 ?

    http://www.analog.com/en/products/switches-multiplexers/digital-crosspoint-switches/adn4612.html#product-overview

    Thanks a lot.

    Best Regads,

    Viktor

    vik1228@sch.bme.hu

  • AD8156 and ADN4612 in HDMI application

    Can I use AD8156 and ADN4612 in HDMI 2.0 applications. They want to know whether these switches will work with HDMI 2.0 protocol. Thread 36599 on ADI’s Engineer Zone states “The ADN4612 is an asynchronous, protocol agnostic crosspoint switch, which means…

  • Question about using LVDS with ADN4612

    I have a question regarding the ADN4612,

    I am interested in using it with an LVDS signal at a rate of about 1 Gbps. There does not seem to be any information in the datasheet that would suggest there would be any wrong with this, I would just like to…

  • ADN4612 behaviour with pathological signals

    Hello,

      I am looking at the ADN4612 and I was wondering how the part behaves with a pathological signal applied to it (i.e. 0x300 followed by 0x198 to give you 19 zeros followed by a unique one or vice versa).  I would be interested to know how the equalizer…