• ADF4351+ADL5801

    Hi,

    I'm working with the ADF4351+ADL5801 project, in which the ADF4351 provides a 1.7 GHz LO for the mixer ADL5801. I referred to the Circuit Note CN-0239 which is attached with the message. In this circuit note, the two bias inductors L2 and L3 on…

  • I want to simulate the circuit of ADL5801 using ADS. Who will provide me the zap file of ADL5801 ? Thank you very much !!

    I want to simulate the circuit of ADL5801 using ADS. Who will provide me the zap file of ADL5801 ? Thank you very much !!

  • AD9957+ADL5801

    AD9957评估板输出的中频模拟信号是否可以直接和ADL5801进行无缝连接,需要进行阻抗匹配吗?AD9957的输出阻抗是多少?

    谢谢!

  • AD9957+ADF4351+ADL5801

    Hi, everyone!

    I use AD9957+ADF4351+ADL5801 in an up-conversion application. The AD9957 generates a 50 MHz intermediate frequency signal which is sent to the RF port of the ADL5801; The ADF4351 provides a  1700 MHz LO, and the ADL5801 mixes the two signals…

  • ADL5801

    I want to use adl 5801 for my downconverter mixer...I want to give 5.8 GHz rf port and get 400 Mhz from IF port      and when I simulate s parameter of ADL 5801 and perfectly matching(Impedance tuner)  RF ports with using awr microwave office I get worst result…

  • ADL5801

    I'm looking to find s-parameters for this device.  I'm trying to use it at f RF~250MHz, f LO~70MHz.

    Thanks,

    Tim

  • ADL5801 PCB

    Hello,

    I'm drawing a PCB and I was wondering if there would be a suggested mounting configuration for this mixer (ADL5801).

    Because I couldn't find anything on the website.

    Could someone help me please?

    Thanks

    Chris

  • ADL5801 Detector output

    Hello,

    I am trying to understand relationship between pin 11 DETO and pin 9 ENBL. I if understood correctly: when ENBL = '1' than detector is disabled and there is no output voltage on DETO.

    Can someone confirm,please?

    Regards,

    Iouri

  • ADL5801 - RF input power

    Hi,

    We have ADL5801 Mixer on our board and we are able to successfully upconvert the RFin signal. Our RF input signal is generally of high power "0 to 5dBm". We have fed this signal into Mixer without any attenuation. Will there be any reliability concern…

  • ADL5801 Vset input current

    Is there any spec available for the input current on the Vset pin (pin10) for the ADL5801.  This would be useful for knowing which value resistors to chose for biasing this pin.