• RE: Pulsing Vcc for ADL5321

    Hi,

    We have not tested this parameter. But the switching time should be less than 50nS, it may even be around 10nS. So if you want to turn off the device for uSeconds, it is feasible. But you need to turn on before hand.

    Best,

    Kagan

  • RE: Query related to RF trnasceiver design

    To get from +5 dBm to +30 dBm, you will generally need two stages of amplification.  So in addition to the ADL5604 1 Watt amplifier that BobC recommends, also take a look at some lower power devices for your first gain stage.  Good choices would be ADL5601…

  • 6.5ghz amplifier

    hello,I use synthesizers that gives me 8 dbm output power,on 6.5ghz .I must amplify it to 20dbm to input it to a multiplier .of course

    it would be possible use a small power gaasfetbut I'd prefer to use a mmic.tHe circuit should simpler ,smaller and…

  • RE: ADI的RF放大器能不能应用一下范围

    您好!

    ADI工作于2.4GHz频段的射频放大模块产品有很多,请见附件内表格,供您参考。

  • RE: RF Amplifer for Keysight Genesys

    The attached list details all of the ADI RF Amplifier Sys-Parameter models that are available in the 2015.08 release of Keysight Genesys.  This library will be updated over time.

       

    PartNumber RealPartNumber Description
  • 五类放大器的基本特性

    LNA(低噪声放大器)、IFA(中频放大器)、驱动器放大器、增益模块和VGA(可变增益放大器),他们的基本特征你都掌握了么?


    低噪声放大器

    低噪声放大器(LNA)通常用作接收路径中的第一个有源元件,它是界定系统总体性能的关键元件,必须能在不显著增加噪声的情况下成功放大极低的电平信号。选择LNA时需要考虑的一个重要特性是噪声系数,该系数与放大器增加到输入信号中的噪声量有关。P1dB和OIP3也很重要,前者与放大器可以输出的线性信号功率量有关,后者与功率处理能力,即放大器能够处理而不会受到损害的输入功率量有关…

  • TAGS LIST: RF and Microwave

    HMC928
    HMC929
    HMC931
    HMC932
    HMC933
    HMC934
    HMC935
    HMC247G
    HMC538
    HMC-C018G
    HMC-C025G
    HMC-C053G
    HMC-C584G
    HMC7056G
    HMC7054G
    HMC7053G
    HMC7056AG
    HMC642G
    HMC642AG
    HMC643G
    HMC644AG
    HMC647
    HMC647A