• ADIS16488技术咨询

    你好,有和ADIS16488性能差不多,包含加速度计,陀螺仪,磁力计,压力计,同时陀螺仪量程大于450dps的产品吗?

  • adis16488内部温度

    关于adis16488内部的温度在工作时会因为产热而迅速升高,在长时间采集数据是噪声会受温度影响,所以无法测得某一温度下的零漂数据,所以想知道手册中的25℃的allan方差是怎么得出的,是指环境温度25℃还是内部温度25℃。比如我需要连续采集10分钟相同温度的陀螺数据,但无法保证内部温度保持稳定。

  • RE: 问题: ADIS16488的几个问题

    This question has been closed by the EZ team and is assumed answered.
  • RE: ADIS16488 Calibration

    This question has been assumed as answered either offline via email or with a multi-part answer. This question has now been closed out. If you have an inquiry related to this topic please post a new question in the applicable product forum.

    Thank you,
  • FAQ: ADIS16488 Evaluation Tool Overview

    Q:

    Where do I find information on evaluation tools for the ADIS16488 Inertial Measurement Unit (IMU)?

    -----------------------------------------------------------------------------------------------------------------------------------------------

  • RE: Errors in ADIS16488

    This question has been assumed as answered either offline via email or with a multi-part answer. This question has now been closed out. If you have an inquiry related to this topic please post a new question in the applicable product forum.

    Thank you,
  • RE: ADIS16488 Bias Optimization

    This question has been assumed as answered either offline via email or with a multi-part answer. This question has now been closed out. If you have an inquiry related to this topic please post a new question in the applicable product forum.

    Thank you,
  • RE: Synchronization of ADIS16488

    This question has been assumed as answered either offline via email or with a multi-part answer. This question has now been closed out. If you have an inquiry related to this topic please post a new question in the applicable product forum.

    Thank you,
  • About ADIS16488 reset to factory setting

    I have tried to reset my ADIS16488 to factory setting(Turn to Page 3 (DIN = 0x8003) and then set GLOB_CMD[7] = 1 (DIN = 0x8280, then DIN = 0x8300) to reset the operation ), then all of the recallings is 0xffff no matter what command is sended off