• magnetometers output of ADIS16400

    I've just been developing my application with the ADIS16400 and having
    difficulty figuring out the magnetometers. The gyroscopes and accelerometers
    are fine. I have them working in a kalman filter and the performance is
    exceptional. The magnetometers…

  • ADIS16400 magnetometer response calibration

    I was under the impression that they were pre-calibrated. After an initial hand
    calibration, the heading resolution in the EKF is much better. However I think
    a more robust method is required because my hand calculation was based on
    rotating the…

  • Bugs in adis16400 linux iio driver (using a adis16448)

    Hallo,

    Buffered polling an adis16448 using the adis16400 linux iio driver via the /dev/iio:device0 interface revealed some bugs in the driver:

    - trying to enable the buffer with only time_stamp channel active (result: invalid argument), activating a…

  • ADIS16400 Flash corruption

    Hello,

    I've run into a problem with the various command registers in the ADIS16400, in that they do not seem to be consistently updating when given the SPI instruction to do so. Further complicating matters is that it seems that the original flash backup…

  • ADIS16362 IIO Driver for Raspberry PI?

    According to the instructions at https://wiki.analog.com/resources/tools-software/linux-build/generic/raspberrypi we can build build Linux kernel for Raspberry PI and can add driver support for adis16400 which indeed support ADIS16362.

    But the question is…

  • ADIS16362 IIO Driver for Raspberry PI?

    According to the instructions at https://wiki.analog.com/resources/tools-software/linux-build/generic/raspberrypi we can build build Linux kernel for Raspberry PI and can add driver support for adis16400 which indeed support ADIS16362.

    But the question is…

  • ADIS16362 IIO Driver for Raspberry PI?

    According to the instructions at https://wiki.analog.com/resources/tools-software/linux-build/generic/raspberrypi we can build build Linux kernel for Raspberry PI and can add driver support for adis16400 which indeed support ADIS16362.

    But the question is…

  • Tag List: MEMS Inertial Sensors Tags

    The following is a list of parts this group talks about. Update as necessary.

    ad22282-a-r2, ad22290, adia16201, adis16003, adis16006, adis16203, adis16204, adis16209, adis16210, adis16223, adis16227, adis16228, adis16229, adis16240, adis16255, adis16265…

  • FAQ: ADIS16364 not working on EVAL-ADIS

    Q:

    When I connect my ADIS16364 device to the EVAL-ADIS system, the gyroscopes are all pegged to 409 deg/sec and the device does not seem to be working. Any ideas?

    ---------------------------------------------------------------------------------------…