• Physical measurement principle ADIS Analog Devices

    hello,

    I'm interested in the measurement principle of the ADIS16006.

    Does this works on capacitive, or piezoelectrical principle? If piezoelectrical principle, electrical or resistive?
    Thanks for…
  • ADIS16006 orientation

    Please can you confirm that the axes are as per the data sheet of ADIS16006.
    I am using address 1 for the Y axis and address 0 for the X axis but I appear
    to get the data reversed when compared with figure 23 of the data sheet.

     

    The datasheet…
  • RE: About vibration measurement & ADIS16006

    Hi,NevadaMark:

    for A2:It is the best case if BW>=2kHz,but we may have to make a compromise, for example, 1.6kHz BW. Considering that the ADXL350 is much cheaper than ADIS16006, we are afriad that the performance of ADXL350 is not as good as ADIS16006…

  • Is there any MTTF calculation report for the following Mems devices: ADIS16485, ADIS16445, ADIS16006?

    Hello, I need the MTTF values of the following Mems sensors:

    ADIS 16485

    ADIS 16445

    ADIS16006

    Thanks in advance!

  • Dilemma: Tilt Sensor: ADIS16006 and ADIS16203???

    I am building a 2 axis tilt sensor with digital interface to host controller for which we are finalizing mems sensor. I came across two products on your website, viz. ADIS16006 and ADIS16203. One is an accelerometer whether the other is inclinometer.…

  • 关于ADIS16006的SPI时钟配置问题

    1.硬件上把ADIS16006SPIdsp28335SPI连接,28335的时钟配置的四种方案和ADIS16006的时序图在附件里,28335SPI是否应该选第三种(加红框)?如果不是,麻烦您解释指导;

     

    2.ADIS16006加计采样频率如果超过10k会发生采样错误,而输入的时钟频率最小是10KHz,如果CS引脚一直是低电平,是不是把时钟频率设为160KHz可能造成采样错误?

    谢谢!

  • MEMS Inertial Sensors Tags

    The following is a list of parts this group talks about. Update as necessary.

    ad22282-a-r2, ad22290, adia16201, adis16003, adis16006, adis16203, adis16204, adis16209, adis16210, adis16223, adis16227, adis16228, adis16229, adis16240, adis16255, adis16265…

  • RE: 工程师百问百答——低电平信号采集传感器

    本次论坛会议的完整讲义,请点击附件下载


  • ADIS16006引脚配置以及带宽与分辨率的关系

    ADIS16006引脚XFILT、YFILT电容是不是设置成一般大?且两引脚电容为零时是表示两引脚开路吗?什么都不用接吗?VCC所接电容应该设置多大比较合适?如果XFILT、YFILT两引脚电容为零此时加速度计的分辨率是多少?带宽跟分辨率的关系是什么?此外带宽对采样速度有没有影响?这些是我在看手册的疑惑,新手入门,多谢各位大神指教。

  • RE: ADI设计峰会讲义分享——低电平信号采集传感器

    本研讨会完整PDF文档在这里,供大家参考!