• RE: ADG715 Not accepting changes

    Hi Dan,

    Yes Charly's advice would be a good measure to take to isolate the ADG715 itself.

    Are you getting the below sequence on the first write/read but not for any write/read sequence that follows ?

    A scope shot of your SCL and SDA line may…

  • RE: ADG715 in UART Switching

    1Hz = 2 bps, 1 bit is a half of period. Bit Rate = 1/(Tb), Where Tb is the bit duration.

    Therefore the frequency of the signal should be ~57.5 k Hz. The ADG715 switch will pass a signal of this frequency. Please take note of the rise time of the signal…

  • ADG715 Operation with VDD=VSS=0V

    I have connected the ADG715 to another part. Both share a common ground, but
    only the other part is connected to +5V. Will the ADG715 function correctly if
    it is only connected to ground.

     

    When we look into the absolute maximum ratings…
  • ADG715 Ack issue, but scope trace looks ok

    Hello all,

    I am having some difficulty getting the ADG715 channels to turn on. I am sending 0x90 (1001 0000) followed by switch configuration, please, refer to scope image. According to the datasheet, page 13, it looks like the ADG715 is not acknowledging…

  • TAGS LIST: Switches/Multiplexers

    AD8104
    AD8105
    AD8106
    AD8107
    AD8108
    AD8109
    AD8110
    AD8111
    AD8112
    AD8113
    AD8114
    AD8115
    AD8116
    AD8117
    AD8118
    AD8175
    AD8176
    AD8177
    AD8178
    AD8186
    ADV3200
    ADV3201
    ADV3202
    ADV3203
    ADV3205
    ADV3224
    ADV3225