• ADG5436 VSS supply and NC connection

    Hello, I'm using ADG5436 to control another switch which needs -30V and 0V as  a Logic input.

    Here I'm Connecting VSS, S1A, S2B to -30V and VDD, S1B, S2A to +5V. 

    Attaching Schematics for better understanding. 

    Question is, with -30V, any changes…

  • ADG5436 overvoltage protection

    I have a question about protecting the inputs of an unpowered ADG5436. The document

    'Ask The Applications Engineer–40 Switch and Multiplexer Design Considerations for Hostile Environments'

    http://www.analog.com/library/analogdialogue/archives…

  • Input Protection of ADG5436

    I use the ADG5436 in an application where it can happen that signals are applied to the analog inputs to the unpowered switch.
    I want to ask if external schottky diodes to the supplies are recommended in such an application to protect the internal clamping…

  • For ADG5436 what if D pin get shorted with ground

    Hi,

    In ADG5436 what if D pin get shorted with ground? Will it permanently damage the IC or it will recover when short removed from output pin D of the IC.

    Also how much maximum current it will allow to pass from S to D side when shorted to ground.

    …

  • ADG5436_不平衡电源

    有一个关于ADG5436的问题。客户想利用单刀双掷(SPDT)开关产生-40V到0V的逻辑信号，因此他需要一个不平衡的电源。例如：Vss=-40V，Vcc=7V。然而，我认为这会超出ADG5436的电源范围。我不确定ADG5436或任何其它器件是否能支持该应用。

    我让客户进行一些测试。

  • RE: Problem with ADA4004-4/ADG1436/AD7628

    Hi Joaquin,

    The ADG5436 is a pin-for-pin replacement of the ADG1436. However, it's not a spec-for-spec replacement so you'd need to make sure that the ADG5436 performance is good enough for your application.

    You mentioned pin 14 and the EN…

  • RE: ADG1436 with Single 28V supply

    Hello,

    Apologies for the delayed response.

    Unfortunately the single supply operational range  of the ADG1436 is from minimum 5 V to maximum 16.5 V.

    You could have a look at the ADG5436 or else the ADG5436F. These have a maximum single supply range of…

  • RE: ADG1436 with Single 28V supply

    Hello,

    Apologies for the delayed response.

    Unfortunately the single supply operational range  of the ADG1436 is from minimum 5 V to maximum 16.5 V.

    You could have a look at the ADG5436 or else the ADG5436F. These have a maximum single supply range of…

  • ADG5436_unbalance power supply

    Q 

    Can I  use SPDT switches to generate a -40V to 0V logic signal. So he needs a
    unbalanced power supplies. For example Vss=-40V, Vcc=7V. However, I think it
    will exceeds the power supply range of ADG5436. I am not quite sure whether
    ADG5436…

  • RE: What is the AD equivalent part number to discontinued SSM2402...for Audio?

    Hello Dave and Eric

    Thanks very much for replies!

    Eric...you say ADG5436.

    It could be very interesting but as you say it has no dip model of it.

    OK. If I would stick in using ±15V supplies only what according to you should be the nearest(s) équivalent…