I'm using the ADG5404F. When I switch the addree A1 and A0, A 5V pulse of approximately 400ns long appears at the D port. This has a serious impact on my system. Is there any solution to remove it? The VDD is 8V. The VSS is -8V. There is 32 adg5404F…
We would like to use ADG5404F multiplexers to select output for a single current source. I am wondering if it is possible to connect the current source to the D pin (pin 6) and sink on the S pins (pin 4,5,10,11) with using 40V single power supply…
I am using ADG5404F as Multiplexer, but encounters several questions.
1) In my application, 100~200mA continuous current is needed, is ADG5404F ok?
2) I check the datasheet, it mentions continuous current up to 280mA(Table 5), but in ABSOLUTE…
You could take a look at the ADG5404F it is a 4:1 Multiplexer. it has a maximum single supply voltage of 44V or +/-22 V Dual Supply. The multiplexer also has input overvoltage protection up to +/-55 V.
For more information on this part and our overvoltage…
Q1. Can you explain the Fault detection function to me and how it may offer benefits to my system?A1. The voltages on the source inputs of the ADG5412F are continuously monitored and the state of the switch is indicated by an active low digital output…
The ADG508A or ADG1408 switch inputs cannot exceed the power supply rails so there is a risk of damage if the input voltage is higher than expected or if the power supply turns off while switch inputs are still present. The abs max ratings…
Thanks for the clarification,
For the single SPST request have a look at the ADG1401. Very low Ron & Ron flatness and this is available in a 8-Lead MSOP or 8 LEAD LFCSP package.
Details here: http://www.analog.com/media/en/technical…
One other thing to look out for is the max ratings of the device. I saw on a separate email trail that the digital or analog inputs may be powered while the device is unpowered? If so, the max ratings are being exceeded and this could trigger…