• RE: SPDT

    Hi,

    Thanks for getting in touch.

    The ADG5243F is an triple SPDT switch. however the maximum operating voltage is 44 V.

    Can you share more details about your application and why you require up to 46 V?

    Regards,

    David

  • 关于ADC芯片 AD7124-4的前端电路保护问题!!

          最近我在项目上采用了AD7124-4芯片进行PT100温度传感器采集温度,采集效果还不错,采用比例测量法。外部用ADG1607模拟开关来进行通道切换。

          但是我看ADI给的参考设计都是AD7124的PIN管教直接连接PT100传感器,我的设备传感器连接线缆超过1米,因此我担心ESD干扰或者其他的信号对AD7124

    造成损坏,我看一般的建议是加限流电阻、TVS和ADG5243F进行保护,但是ADG5243F成本太高了,不知道还有没有其他的方法对AD7124进行保护呢?

  • RE: ADG1234 analog inputs clamping diodes

    Hi David,

    At first flance, the ADG5243F looked good for our application.

    Unfortunately, we needed to use the switch in a SPDT configuration (with

    the high voltage on the SP side), so this IC does not fit.

    In the end we have completely changed the…

  • TAGS LIST: Switches/Multiplexers

    AD8104
    AD8105
    AD8106
    AD8107
    AD8108
    AD8109
    AD8110
    AD8111
    AD8112
    AD8113
    AD8114
    AD8115
    AD8116
    AD8117
    AD8118
    AD8175
    AD8176
    AD8177
    AD8178
    AD8186
    ADV3200
    ADV3201
    ADV3202
    ADV3203
    ADV3205
    ADV3224
    ADV3225
  • What happens to the output during an over-voltage event?

    What happens to the output during an over-voltage event?

     

    The drain output will be clamped during an overvoltage fault condition. The
    ADG5248F, ADG5249F, and ADG5243F have secondary supplies (POSFV, NEGFV) which
    will be the clamp voltages…
  • Are these parts pin-pin compatible with existing parts?

    Are these parts pin-pin compatible with existing parts?

     

    Yes, the ADG5208F/ADG5209F are pin-for-pin compatible with the ADG5208/ADG5209
    and ADG1208/ADG1209. They are drop in replacements if overvoltage protection is
    required. However…
  • RE: Thermal resistance (θjc) (θjb) for AD8180 & ADG5243

    Hi Mark,

    Apologies for the delay, See below for the ADG5243F

               

    Θjb = 16.67°C/W

    Rjc for exposed paddle packages is normally measured to the exposed paddle.

    However where Rjc is to be used as part of a 2 resistor compact thermal model/simulation, then…

  • FAQ: ADG52xxF

    Q1. What are the key benefits of these fault protected switches?

    A1.  There are a number of key features on these parts

    • Overvoltage fault protection to +/-55V levels in powered and unpowered state
    • Secondary supply rails to allow for user defined…
  • 开关与多路复用器产品常见问题解答_Rev 2.1

    ADI 中国技术支持中心为客户整理了“开关与多路复用器产品常见问题解答_Rev 2.1”,其在原有“开关及多路复用器产品常见问题解答 Rev 1.0”的基础上进行了补充升级,供客户自助快速查询常见问题的解决方案。 PDF