• ADG5208F

    I need some help or a spice model to help with a problem that I am working on.  I have a pretty high bandwidth 10MHz large voltage swing 15Vpp signal that I am trying to pass through this switch without distortion.   Can this part pass the signal without…

  • ADG5208F can be used as Demux too?

    Hi All,

    I have an requirement  to select a part for 2 applications in my design for 8:1 Mux & 1:8 Demux.

    ADG5208F is simple and easy.

    My Supply would be VDD-12V VSS-0V, Input Analog range 0-10V.

    Do you see any problems in it?

    If understand it right…

  • ADG5208F

    Hello,

    I have the question about ADG5208F.

    Q.How does it work, if it has follow status?

    　Vcc =24V

    　Input = 5V

    　Signal = switch ON

    　D = GND

    In this case, it connected for the OPAMP .

    The customer want to not get the damage, when the OPAMP's voltage…

  • RE: Comparison of THD in Analog Multiplexers

    Hi Steve,

    Currently, we are working on a THD calculator for our switches and multiplexers that should help people with similar questions.

    You are correct. THD is directly related to RON Flatness and the device's on-resistance, circuit input resistance…

  • Are these parts pin-pin compatible with existing parts?

    Q 

    Are these parts pin-pin compatible with existing parts?

     

    A 

    Yes, the ADG5208F/ADG5209F are pin-for-pin compatible with the ADG5208/ADG5209
    and ADG1208/ADG1209. They are drop in replacements if overvoltage protection is
    required. However…

  • What happens to the output during an over-voltage event?

    Q 

    What happens to the output during an over-voltage event?

     

    A 

    The drain output will be clamped during an overvoltage fault condition. The
    ADG5248F, ADG5249F, and ADG5243F have secondary supplies (POSFV, NEGFV) which
    will be the clamp voltages…

  • RE: Voltage leak on ADG1406BCPZ

    HI Vincent, 

    Is the 12 Vdc the supply for the ADG1406?

    If so it sounds like you might be violating the max ratings of the ADG1406.

    The source inputs must be kept within the supply voltages.

    The source inputs of the ADG1406 have internal esd protection…

  • TAGS LIST: Switches/Multiplexers

    AD8104
    AD8105
    AD8106
    AD8107
    AD8108
    AD8109
    AD8110
    AD8111
    AD8112
    AD8113
    AD8114
    AD8115
    AD8116
    AD8117
    AD8118
    AD8175
    AD8176
    AD8177
    AD8178
    AD8186
    ADV3200
    ADV3201
    ADV3202
    ADV3203
    ADV3205
    ADV3224
    ADV3225
    …

  • RE: ADG5408 Power-Off Protection

    Hi Hiroyuki,

    When you say "power off" do you mean VDD and VSS supply at 0 V?

    If so the max ratings section of the datasheet states that the source terminal of the ADG5408 must be kept to within 0.3 V of the supplies.

    Therefore if the VSS and…

  • RE: ADG508F ESD rating

    Hi,

    Apologies for the delayed response on this.

    There is no dedicated ESD Protection on these devices. They have been tested and can withstand +/-300 V HBM ESD.

    We have recently released a family of new over-voltage protection switches and multiplexers…