• ADG465 Single Supply

    Hi,

    is it possible to use the ADG465 as Channel Protector for Single Supply Opamp input circuit (Signal Range 0-10V) ( ADG465 VDD=+12V VSS=0V ), or does it raise my lower border of my input range to VSS+2V, so I wouldn't have full input scale 0-10V anymore…

  • Replacement for ADG465

    I'd like to know what is possible replacement for ADG465 before EOL is announced. It seems that part became hard to impossible to find. Currently from big five distributors it is available only from Arrow. Digikey list it as "obsolete", Farnell said …

  • ADG465 Frequency and phase response

    Hello Community,

    I was able to find frequency and phase response for channel protection ic ADG467 but not for the ADG465. Can I consider as the same? If not, where can I find this information? I also couldn't find any simulation model.

    Thanks in…

  • Internal resister for ADG465

    Dir Sir/Madam,

    I have some questions for ADG465BRTZ.

    Question-1
    Does the following 2 functions same as MUX ADG508F and ADG509F?

    1)Over voltage protection
    2)When power off, the internal MOSFET D-S keep off

    Question-2
    When ADG465 is out the following conditions…

  • RE: Channel Protection Device in tiny Package

    Hi Niels,

    Thanks for the feedback on out channel protector parts ADg467/ADG465 and the ADG5462F. That is always great to hear.

    Is it size reduction you are primarily interested in? do you use a lot of these devices on a board?

    Or are you more interested…

  • RE: what's the status of ADG849 when power off?

    Hi,

    The condition that will be present at the output of the ADG849 cannot be guaranteed by us if there is no power supply present.

    We do have some switches that can handle the situation where there is no power such as the ADG508F and the ADG465/67 but…

  • RE: Problem with ADG1606 protection

    HI imanjohn,

    If you prefer the second option you must also ensure that the voltage on the pin does not exceed the voltage max ratings. It may be best to use the current limiter with a Schottky diode to ensure both over current and over voltage requirements…

  • Short to Battery Protection Circutiry for Automotive Video Decoder

    Dear Sir/Madam,


    One of my customers is using an ADI video decoder (ADV7280) in an automotive environment. They are feeding analog video over a CVBS cable into the ADV7280.

    Our recommended input circuit to the ADV7280 uses a resistor divider (24 Ohm…

  • ADG734: Usage without supplies

    I've a short question concerning the analog switch ADG734 (SPDT) :

    This analog switch should be a replacement for a relay.
    Therefore I'd like to know what happens when the supply voltage of the ADG 734
    is cut off. Does it act…
  • TAGS LIST: Switches/Multiplexers

    AD8104
    AD8105
    AD8106
    AD8107
    AD8108
    AD8109
    AD8110
    AD8111
    AD8112
    AD8113
    AD8114
    AD8115
    AD8116
    AD8117
    AD8118
    AD8175
    AD8176
    AD8177
    AD8178
    AD8186
    ADV3200
    ADV3201
    ADV3202
    ADV3203
    ADV3205
    ADV3224
    ADV3225