• Differences Between LTC4267IGN, LTC4267IGN-3 and LTC4267CGN-3

    Hello Guys,

    I want to know the diference between the LTC4267IGN, LTC4267IGN-3 and LTC4267CGN-3.

    They are direct substitutes?

    If not, what is the main difference between each one?

    Thanks!!


  • RE: ADF4360-3 lost lock after PA turns on

    This question has been assumed as answered either offline via email or with a multi-part answer. This question has now been closed out. If you have an inquiry related to this topic please post a new question in the applicable product forum.

    Thank you,
  • ADF4360-3 eval board register values

    I have used ADI PLL Sim to generate a design for a 900 MHz CW local oscillator using an ADF4360-3. Currently I'm trying to work out how to program into the ADF4360-3 eval board based on the simulation file results. What should the RF output frequency…

  • ADF4360-0 : Frefin below 10MHz ?

    hy,

    in the data sheet of the ADF4360-0 frefin minimum is mentioned with 10MHz with an advice to couple below 10MHz via DC. I try to use 2MHz TTL-Signal to frefin with the result of large jitter on the R-Out monitored on MUXOut and no lock of the PLL. 

  • Ev-ADF4360-1EB1Z L1,L2

    I bought the Ev-ADF4360-1EB1Z. When I look at the board, L1, L2, R25 and R26 are all not mounted.
    Is this correct?

  • Dynamically linked Shared Object Libraries (*.so) For Evaluation board of ADF4360-3

    I have the evaluation board of ADF4360-3. 

    I want to access it using myRIO from National Instruments (NI). This device is Running Linux Real Time OS... If I have the .so library for this device i can access the device using Labview and MyRIO.

    this is…

  • 3/3/2022 Enabling the Next Generation of Sustainable Motion Detection & Sensing

    This webinar will introduce new sensing technology, which will enable a new generation of smart, sustainable, remote, motion sensing.
  • 3-Axis Sensing

    The power solution in this interactive document offers a detailed summary of the power supply design for each scenario in the 3-Axis Sensing signal chain option.

    The document includes the power requirements, the block diagram and power tree, and the recommended…

  • RE: ADF4360 SPI Configuration question - 4 SPI writes required vs. 3?

    This question has been assumed as answered either offline via email or with a multi-part answer. This question has now been closed out. If you have an inquiry related to this topic please post a new question in the applicable product forum.

    Thank you,