Search - EngineerZone

RE: Need example to connect current transformer to ADE7933

dave.smith

Regarding Current channel sensing through CT in ADE7953

I replied here is this the same question?

Dave
- 1 month ago
- Energy Monitoring and Metering
- Q&A
ADE7978/ADE7933 Measurements always return the same value

cedric.knez@ioxlab.de

Hello,

My circuitry consists of 3 x ADE7933 managed by one ADE7978.

The analog frontend is set to only take measurements on the first voltage channel.

I can communicate perfectly fine with the ADE7978, setting up the config registers and sending the run…
- over 1 year ago
- Energy Monitoring and Metering
- Q&A
Little Error in the datasheet of the "ADE7933"

micropower01

I don't know where I should report an datasheet-Error.

In the datasheet of the ADE7933 / 7978 on page 31 (TEST CIRCUIT) there is a pullup resistor to 3.3V from the Pin "EMI-CTRL" with the value of > 10 nano Ohm < (10nΩ) .

A very…
- over 2 years ago
- Energy Monitoring and Metering
- Q&A
ADE7933/ADE7932 input circuit

ASanchez

Hi there,

We have designed an energy metering device based on the ADE7978/ADE7933/ADE7932 family, following the datasheet guidelines. We have also managed to calibrate the measurement with the precision required. However, we have found that sometimes when…
- over 4 years ago
- Energy Monitoring and Metering
- Q&A
RE: Question on ADE7978/ADE7933/ADE7932/ADE7923 devices

EZAdministrator

This question has been assumed as answered either offline via email or with a multi-part answer. This question has now been closed out. If you have an inquiry related to this topic please post a new question in the applicable product forum.

Thank you,
…
- over 3 years ago
- Energy Monitoring and Metering
- Q&A
RE: Range of AC input line frequency ADE7978/ADE7933 chipset can measure

EZAdministrator

This question has been assumed as answered either offline via email or with a multi-part answer. This question has now been closed out. If you have an inquiry related to this topic please post a new question in the applicable product forum.

Thank you,
…
- over 3 years ago
- Energy Monitoring and Metering
- Q&A
RE: ADE7978- ADE7933 How to interpret the digits of the energy-register

EZAdministrator

This question has been assumed as answered either offline via email or with a multi-part answer. This question has now been closed out. If you have an inquiry related to this topic please post a new question in the applicable product forum.

Thank you,
…
- over 3 years ago
- Energy Monitoring and Metering
- Q&A
What is happens if I use a shunt less than 180 µΩ with these ADE7932/ADE7933?

OlegTre

What is happens if I use a shunt less than 180 µΩ for example 50 µΩ (for measure current about 500 A) with these ADE7932/ADE7933?

How to measure the current more than 500 A with these ADE7932/ADE7933?
- Answered
- over 5 years ago
- Energy Monitoring and Metering
- Q&A
ADE79xx

GenevaCooper
Resources specific to the ADE79xx series of parts can be found here.
- ADE7912 / ADE7913
  
  ADE7913, ADE7912 Data Sheet
  
  ADE7913, ADE7912 Architecting Meter
- ADE7953
  
  ADE7953 Data Sheet
  
  ADE7953 Calibration Application Note
- ADE7978 / ADE7933 / ADE7932 /…
- 4 months ago
- Energy Monitoring and Metering
- Documents
RE: ADE7978/ADE7932 Rsense configuration

dave.smith

https://www.analog.com/media/en/technical-documentation/data-sheets/ade7978_7933_7932_7923.pdf

pg 89 figure 113

Like this?

The ade7978 ade7933 chipset can do delta measurement using shunts.

Dave
- 6 months ago
- Energy Monitoring and Metering
- Q&A