Using two ADCLK946's, I would like to series connection.
I would like to connect the output of 1st ADCLK946 to the input of 2nd ADCLK946.
Please let me know the circuit of termination in this case.
Is ｔhe attached circuit correct?
Use of an ADCLK946 would easily accomplish this goal. Connect the VCO output to the input of the ADCLK946 and the outputs to the various demodulators.
The circuit on figure 17 of the ADCLK946 datasheet is the most suitable for the task you wish to accomplish…
The E5052B RF IN port is already a 50ohm. So there is no need to terminate the ADCLK946 into a 50ohm and then plug that into the E5052B. You just lowered the load impedance for the ADCLK946 driver and the voltage of the clock signal seen by…
Do you need LVDS outputs? Typically ADCs benefit from the large swing and fast slew rate of an LVPECL driver.
This circuit note shows an ADF4351 connected to the ADCLK948 and the resulting performance.