• codec ADAU1361 −12% to 14% typical input Gain Error

    Hello,

    I use a ADAU1361 on the audio path of a radio. The value of the digitilized input signal does not match with the input measured signal. The "error" is between 0.4dB to 0.8dB, for 150mVrms/1kHz sine input (its alomst the same error with smaller…

  • RE: ADAU1361/ADAU1761 Issue

    This question has been closed by the EZ team and is assumed answered.
  • RE: ADAU1361 PLL lock problem.

    This question has been closed by the EZ team and is assumed answered.
  • ADAU1361 Noise When Unplugged

    Hello,

    Hope all is well.

    We use ADAU1361 in our design with two single ended microphones. 

    The two mics are connected to negative inputs as pseudo differential and grounded with AUDIO_GND.

    When we unplug each microphone, we observe high background…

  • Noise in ADAU1361 recording

    Hi,

    I am getting continuous noise in background when I play the file recorded using Microphone. I have connected MIC on headphone Jack, there is no noise while playing other files (not recorded by MIC) on Headphone out.

    Below is the schematics, Can you…

  • TDM 4 mode on ADAU1361: filling up all 4 slots from input

    Hello,

    Question for ADAU1361, TDM4 mode.

    I saw similar thread "TDM 4 mode on ADAU1361: paralleling multiple devices"
    ( ez.analog.com/.../3563 )
    and it describes,

    > in TDM4 mode, the channel routing is like this:
    > ADC_SDATA: ADC0, Inactive channel…

  • RE: ADAU1361輸入訊號配置

    This question has been closed by the EZ team and is assumed answered.
  • RE: ADAU1761 and ADAU1361 MCLK Range and PLL Range

    This question has been closed by the EZ team and is assumed answered.
  • RE: ADSP21371 - ADAU1361

    This question has been assumed as answered either offline via email or with a multi-part answer. This question has now been closed out. If you have an inquiry related to this topic please post a new question in the applicable product forum.

    Thank you,