• ADAS1000-1 Fault bit of FRAMES register question


    I'm using two ADAS1000-1 for getting 12 leads. Every time I initialize two chips and start measuring after power on, the Fault bit of FRAMES register( 0x40[27] ) will be set. If I stop measuring by reset CNVEN bit of ECGCTL register and then start…

  • ADAS1000-1 Amplifier and Filter


    My question is concerning the ADAS1000-1. There are certain electrode input ranges usually from 0.3V to 1.6V I believe. Does that mean we would need to implement an amplifier before sending the ECG signal to the ADAS? Just because an ECG signal…

  • ADAS1000 as 1 Lead System


    Has anyone tried using the ADAS1000 as a 1 Lead System? I am trying to build a simple and portable EKG system using the ADAS1000. However, I only want to use 2 electrodes (1 Lead). From the 10 Leads I am able to use the ADAS1000 with a minimum of…

  • ADAS1000-1 Interfacing With Arduino (or any microcontroller)

    Hello, looking for some help here in implementing the driver provided for the ADAS1000 into my microcontroller, an adafruit feather M0. The issue I'm having is on my arduino IDE is how to correctly import the driver into my library for Arduino.


  • 两片ADAS1000-1做主从时的同步问题






  • LabView source for ADAS1000 and AD7656-1 evaluation boards


    we are developing medical research equipment. We use LabView environment for measuring data and calculating. Until now we use medical monitors connected with LabView A/D converter. We want to use Analog chips for construction of the device with…

  • RE: Gang Mode ADAS1000 and ADAS1000-2 - OPSTAT Register always busy

    Hi Samuel,

    The reason the slave device is busy might be because the configuration was not properly written yet.

    We have an example sequence to configure the parts to master and slave status. Can you try to follow the sequence in example 6 from Page 81…

  • How to use Single ADAS1000 in ADAS1000 EVM Board & ADAS1000 software?.

    How to use Single ADAS1000 in ADAS1000 EVM Board & ADAS1000 software?.

    In ADAS1000 main front panel.vi  the Eval mode option is there and it is configured as Dual. But i am unable to change that option. 

  • ADAS1000/ADAS1000-4


  • RE: ADAS1000 - Communication


    Do you mean LK12? LK2 and J4 are not related to each other. Please refer to UG-426 (Rev. B) (analog.com) for more details on board configuration