• ADA4077-2 Major Improvements

    What major improvements does this family (ADA4077-2) offer to applications?


    Almost all specs are improved over the previous generations. The biggest
    improvement offered to various applications by ADA4077 is the wider bandwidth
    to process…
  • ADA4077-2 Drop-In Replacement

    Is ADA4077-2 a drop in replacement for the previous generation?


    Almost all specifications of this newer product are improved over the parts in
    older generations. Exceptions are IVR and output swings which are slightly
    different. The…
  • ADA4077-2 ESD Ratings and Human Body Model Rating

    ESD ratings for semiconductors used in industrial applications have been
    increasing recently  often requiring Human Body Model, (HBM) rating of 1.5kV to
    2kV or more. What ESD rating does the ADA4077-2 have?


    The ADA4077-2 HBM rating…
  • ADA4077-2 VOS differences between MSOP and SOIC Packages

    Why a difference in VOS specs between the MSOP and SOIC?


    ADA4077-2 has a “B” grade (SOIC package only) and an “A “grade in SOIC and MSOP
    package.  The difference between different grades is Vos parameter. Grade B has
    a VOS specs of…
  • ADA4077-2必须双电源供电吗?只供+5v不行吗?


  • Regarding ADA4077


    I am using ADA4077 opamp in my SMPS design for Feedback for current control. I given single supply of +15V to pin 8 and 4 pin connected to GND. But iam getting 1.34V offset at ping 7,it is effecting my current control.Please suggest me how to minimize…

  • Inquiry of ADA4077-4 for notch filter

    Dear Sir,

    We try to design a notch filter on 400Hz by ADA4077-4 but it can't work. Would you kind to give some recommendation ?Thanks.

  • Schematic verification for the CO sensing using ADA4077

    Hi All,

    We are working on the HVAC solution, where we are using the CO sensing using the Figaro sensor part# TGS5342. For the same we designed the below schematic for the signal conditioning based on ADI op-amp part#ADA4077. Please help to verify the…

  • 关于ADA4077和ADA4610失调电压和偏置电流测试的方法

    尊敬的工程师,您好,最近在做ADA4077和ADA4610失调电压和偏置电流测试,在这里想请教您一下,您那边有没有好的方法去测试这两个参数。我是用聚苯乙烯电容和特氟龙电容测试偏置电流的。谢谢您 。

  • RE: Clock distribution to 2 DDSs (9913) and 2 ADCs (AD7769)


    the AD9577 is a good choice if the 40 MHz clocks to the AD9913 may not be phase aligned to the 40 MHz clocks to the AD7769.

    The AD9577 has two PLLs that are not recommended to work at the same frequency because  the jitter performance is degraded …