• 关于AD9717的输出相位偏移控制(About AD9717 phase offset control)

    您好,

    Hello Ms./Mr. 

     

    AD9717数据表来看,有重定时器的功能可以对相位进行调整,但是只有最低90°的分辨率,远远不够我的设计要求。

    From the data sheet of AD9717,  the function of retimer can adjust the phase,  but only the minimum resolution of 90° is far from my design requirements.

     

    我想知道AD9717是否有相位控制功能…

  • AD9717: Pin connection

    Please advice me how to connect "DVDD" pin, 1. to a capacitor only 2. to 3.3V
    3. do i need to activate the internal LDO or not. 4. others I'm confused since
    on top of Table 1 it's define "DVDD=3.3V" in "absotute max" table DVDD…
  • AD9717 eval board

    Hi, I have an AD9717 eval board. The documentation is difficult to sort out. First, the documentation on the web site is REV A and does not seem to relate to the REV C hardware I have. The information on the CD which came with the eval board, which is…

  • AD9717 power supply

    Hello,

    Does AD9717 support next power supply configuration: AVDD = 3.3V, CVDD = 3.3V, DVDD = 1.8V, DVDDIO = 1.8V?

    Does "Strap DVDD to DVDDIO at 1.8 V" mean "connect DVDD and DVDDIO pins together on the PCB if DVDD = 1.8V and DVDDIO = 1.…

  • Power supply configuration for AD9717

    1) Does the AD9717 support the power supply configuration: AVDD = 3.3V, CVDD = 3.3V, DVDD = 1.8V, DVDDIO = 1.8V?

    2) What is the absolute maximum ratings for DCLKIO?


  • About AD9717 Phase Offset Control

    Hello Ms./Mr. 

    From the data sheet of AD9717,  the function of retimer can adjust the phase,  but only the minimum resolution of 90° is far from my design requirements.

    I wonder if AD9717 has phase control function? Similar to the phase control word…

  • Sinusoidal Wave using AD9717

    Is it possible to create sinusoidal wave using AD9717? If so, how? The DPG Palette on the evaluation board software has an example simple sine generator, but the page is blank. Would appreciate any guidance.

    Thanks

  • AD9717 and AD9117 CML Pins

    What is the purpose of the CMLI and CMLQ pins on the AD9717 and AD9117 DAC famlies and where do they need to be connected?

  • Impedance matching when AD9717 or AD9779A interfaced with ADL5375

    Can you confirm why I need to use 500ohm or 50ohm impedance matching for the
    AD9717 and AD9779A interfaced to ADL5375.
    Sorry for that basic questions, but I am from the digital world.

     

     

    Remember, that the AD9717's and AD9779A's…
  • AD9717 has band of noise at different frequencies at I&Q outputs

    Taking an FFT of the I & Q channels of the AD9717 shows a spectrum of noise that shows up at different frequencies over different printed circuit boards. Noise components have been seen almost 125kHz away from each other, usually there are only a couple…