No, we dont need.
Hey,
Sorry for the late reply.
Driver for ad9680 is here: https://github.com/analogdevicesinc/linux/blob/master/drivers/iio/adc/ad9680.c
We don't have any Linux drivers for AD9543.
We also don't have it in our roadmap (for the short-term / mid-term…
Dear Specialist,
Sorry to trouble, can you help to check whether we can directly read out the TDC and NCO value of AD9543, i can only find auxiliary TDCs' read register.
Hi,
I have a design using the AD9543, that currently uses only two channels connected to a DDS and an ADC. The Ref clock is not used (but in the design) and the clock input is a 25Mhz TXCO
The M outputs are set to show that the system clock PLL, APLL0…
Hi,
first, the ACE works without the evaluation board being connected to the PC. You should use it to obtain the values for the AD9544 registers. The GUI contains a tab called Save Registers that when clicked, it outputs a text file with the registers…
Hi,
this script should work for all AD9546, AD9545, AD9544, AD9543 and AD9542 chips.
Petre
Hi,
if this is a new design, I strongly recommend one of the AD9545 family of chips: AD9545, AD9544, AD9543 or AD9542, depending on what application you are pursuing. Because you talk about using a OCXO, I suppose you need to lock onto a 1Hz clock, so…
HI,
I'll take an action item to change the wiki page. The AD9544 evaluation software (and the AD9545, AD9543 and AD9542) functions in 3 wire SPI mode. It seems to function also in 4-wire SPI mode, although we work always in 3 wire SPI mode with the evaluation…
HI,
your understanding is right.
Changing the AD9544 evaluation board to be seen by the PC as an AD9545 board is necessary if you need configure the AD9544 DPLLs in internal zero delay mode to control 1PPS reference.
If you do not want to do this change…