Hello,I would like to simulate AD9530's behavior with some OCXOs through ADIsimCLK. But despite the indication in the datasheet that specifies that the PLL is available in the software's catalog, I can't find it ... Even with the latest software version…
I'm planning to use AD9530 for ADC clocking.
Is it possible to generate a continuous range of frequencies using AD9530?
I need to make the clock programmable from 50MHz to 200MHz.
Thank you for very much the information.
We have decided to order the evaluation board for AD9530 (AD9530/PCBZ).
But the chip is not available for purchase (I checked Digikey and Mouser).
Can I interface the CML output of AD9530 directly to…
same as https://ez.analog.com/clock_and_timing/f/q-a/104169/ad9530-based-continuous-clock-generator/312118#312118
You'll find power specs on page 7 of the Rev E datasheet. The power number called out there is the typical value in single tone mode, if you are performing a frequency sweep, it will be a little higher due to the additional digital circuitry that…
I didn't succeed to capture AD9208 data using the attached test setup and the following test conditions: Fclock = 2625MHz, FPGA global clock = 328.125MHz, Full BW mode, L=8, M=1, F=1, N'=16 (as recommended in the wiki page). The clock signals have generated…