• AD8592 delay time and shut down time

    Can you tell me  the delay time the amplifier AD8592 takes to be fully
    operational after  enable, as well as the time it takes to shut down
    completely. I can’t find these data in the datasheet.

     

    I have not been able to locate any data…
  • AD8592 in shutdown

     First amp in AD8592 is unity gain buffer whose output feeds -IN of second amp in open loop, i.e. used as a comparator. +IN of second amp is used as reference for comparator.The whole chip is duty cycled using shutdown pin. During shutdown mode, +IN of…

  • Voltage tolerance of AD9591/AD8592/AD8594 in shutdown?

    Hi,

    When the AD9591/AD8592/AD8594 op amps are shutdown, their OUT pins are high impedance. What voltage can they tolerate? (I have the OUT pin connected to a line that's sometimes used as the op amp's output and other times used as an input signal.)…

  • AD8592 for Headphone Amp

    Hi All,

    One of my customer is looking for low cost headphone amplifier.

    Specification is >100mW into 32 ohm headphone.

    Is AD8592 eligible device for his application?

    Best Regards,

    Ricky

  • What is output of ADA4691-2 in Shutdown?

    Hi, all

    I'm looking for op amp with shutdown function,and high impedance when in shutdown.

    Is the output of the ADA4691-2 this function?

    Are all amplifier outputs in a high impedance state, when in shutdown mode?

    There is no description in the…

  • RE: Replacement for AD8672

    Hi Harini,

    You may check on AD8606 which operates at 2.7V to 5.5V. It has similar bandwidth and slew rate performance  and even better bias current specification as compared to AD8672.  For higher bandwidth and faster slew rate, you can also look at A…

  • RE: AD8618 supply decoupling

    FormerMember
    FormerMember

    Elias,

      What does TRRS mean??

      What is your highest signal frequency?

      Depending on whether you need to go to DC or not and can AC couple, you could use op amps

    that have millivolts of offset, rather than <100 uV which drives up the price.

      Also…

  • TAGS LIST: Amplifiers

    AD600
    AD602
    AD603
    AD604
    AD605
    AD8264
    AD8330
    AD8331
    AD8332
    AD8334
    AD8335
    AD8336
    AD8337
    AD8338
    ADL5246
    ADL5330
    ADL5331
    LTC6412
    HMC6187G
    HMC997G
    HMC996
    HMC694G
    AD8368
    AD8351
    AD8367
    AD75071
    AD552…
  • 使用运算放大器实现直流耦合电池供电电路中的问题

    AN-581_cn.pdf

    参考ADI 应用笔记AN_581《单电源应用中的偏置和去耦运算放大器》设计直流耦合电池供电电路,在P6底部提到电路中 RA,RB电阻阻值的选择需要查看AD663A 数据手册,我查过后发现没有AD663A这款芯片,AD6634/6635/6636是已经停产了的模数转换器,数据手册中也没看到这一部分的内容,这个要怎么解决呢?

    问题2:该电路中,使用了一个跟随器电路,它是起隔离的作用吗?但是为什么反相端和输出端之间连接了一个110k欧姆的电阻呢?