Hi Collins,
Thanks for the reply.
We are usilng ADL5801, AGC module AD8368, ADC driver AD8352 and Amplifier AD8350.
We are suppling from DC-DC converter for these modules
Hello all,
I am trying to match the input of the AD8351 to a 100R differential source.
In the datasheet of the AD8351 im referred to the datasheet of the AD8350 which gives me the calculations.
Calculating with 300MHz, a Rload of 5K and a Rsource of…
Hello,
I am looking for an amplifier with these specs :
Rin = high
Rout = 50 ohm
Vin = 2.5V (my iunput signal will be about 2.5V)
Vout = 10V
freq = 13.56MHz
I found many amps that almost fit the specs. However, there is always somthing missing…
关于宽带ADC前端设计考虑ΙΙ:用放大器还是用变压器驱动ADC?
By Rob Reeder [rob.reeder@analog.com]Jim Caserta [jim.caserta@analog.com]
高性能模数转换器(ADC)“前端”的输入配置设计对达到要求的系统性能至关重要 。优化总体设计取决于很多因素 ,包括应用性质、系统组成和ADC的结构。以下的问答主要节绍了使用放大器和变压器影响ADC前端设计的一些重要的实际考虑。
问:放大器和变压器根本区别是什么?
答:放大器是有源器件…
高性能魔术转换器(ADC)“前端”的输入配置设计对达到要求的系统性能至关重要 。优化总体设计取决于很多因素 ,包括应用性质、系统组成和ADC的结构。以下的问答主要节绍了使用放大器和变压器影响ADC前端设计的一些重要的实际考虑。
答:放大器是有源器件,而变压器是无源器件。放大器和其它所有的有源器件一样,消耗功率并且产生噪声;变压器不消耗功率并且产生的噪声可以忽略不计。两者都涉及到动态效应问题。
问:为什么选择放大器?
答:放大器的性能限制比变压器少…