Hi,

I would like to use AD8180.

And, I tried simulating with spice, but I did not have a spice model.

Are there preparations for the LTspice(or Spice) model?

Best regards,

Yuya

Good Morning ADI EnginnerZone community.

thanks for your support until now.

For ESD reason I nned the answer to the following queston

What is the maximum current into IN0 and IN1 of the AD8180 inputs with power off?

For AD8129 the answer is given here…

Hi,

My customers are considering the AD 8180.

When 1 kΩ resistor is attached to the output pin, we confirmed the phenomenon that the output voltage drops as compared with the case of no load.

Since the load is increasing, we believe voltage drop…

Hi,

I would like to use AD8092&AD8180.

So, I have a question. Please help me.

Question:

I am now considering the AD8092(opamp) and the AD8180(multiplexer).
In the past, the power sequence of these analog components was mistaken and the IC was destroyed…

Hi,

I would like to use AD8092&AD8180.

So, I have a question. Please help me.

Question:

I am now considering the AD8092(opamp) and the AD8180(multiplexer).
In the past, the power sequence of these analog components was mistaken and the IC was destroyed…

因实验需求想选购多路复用器芯片，具体要求为：4通道、导通电阻5Ω以下、通道切换响应时间10ns以下，在官网上查询了AD8180这款芯片，想咨询一下有没有类似芯片推荐，以及是否有相应的开发板可以选购？谢谢

HI,

we are implementing 2 to 1 multiplexing circuit using AD8180.

Application1: Toggle between 0V and 1.3V using SELECT  Pin ( i.e, 0/5V TTL).

Application2: Toggle between -0.6 V and -5V using SELECT  Pin ( i.e, 0/5V TTL).

In both cases we are getting zero…

Hi, everyone.

Recently, I use a Xilinx FPGA(Spartan6-lx9tqg144) to control the ad9910. I let the AD9910 work in the DRG mode, and I got the DRG mode work, realizing the freqency sweep from 200MHz to 250MHz.

furthermore, I wanna to get the following…