I am using the AD8054 opamp as a comparator.
I have a scenario in which I apply 3V to the positive input terminal of the AD8054, while the VCC may still be powered off. I didn't see that the AD8054 has input clamping diodes, so I guess it should…
I was checking AD8054 gain and phase frequency curves in datasheet Fig 18, and I noticed that Fig 15 and 18 have same axis-label on the right Y axis. But their values are kind of confusing.
I GUESS it should be this : fig 15 shows the Phase value…
The AD8045 is a unity gain stable. Why the settling time data is only for G=2, and not for G=1?
I addition, why there are a lot of amplifiers why the settling time data is only for 0.1% and not for 0.01%?
Hi. I have the above scheme using the AD8054 op amp. If I ground the JP2 pins I have 0.15 V at the 1, 2 and 3 pins. When I raised pin 3 in the air and connected it directly to GND I still had 0.15V at 1 and 2 pins. If it is not clear in the picture…
I have a customer using the AD8054 in a voltage stabiliser application. It is configured as a voltage follower :-
0-5V on the +ve pin. -ve pin connected to the output. On the output he has two series resistors 5Kohm and 10Kohm to get 3.3V at the…
I am using AD8054 in sallen key topology for designing a 6th pole bessel filter. The cut-off frequency of the designed Bessel filter is 14MHz.
We have simulated the circuit using Multisim and observed a cutoff of 14Mhz. However the same circuit on…