• Overview of AD8018

    I wonder which port is Input, Output, Vdd, Vss

  • RE: Using for AD8397

    Hi Kaos,

    I think AD8018 has more current drive than AD8397 using the circuit in AD8018 datasheet figure 2. If we are going to check the specification of AD8397 in 5V configuration, we gonna see a 230 mA output current drive compare to AD8018 which is…

  • Questions for SSM2211

    Dear Sir/Madam,

    We have a question fo your SSM2211 audio amp.

    We will use your SSM2211 as RF amplifier for more power output instead of current AD8018.

    1)
    As for Page-12 Figure-35
    Thick Line=PHASE SHIFT
    Thin Line=GAIN
    Correct?

    2)
    As for same fig-35…

  • RE: a couple of question for AD8260

    Hi Kaos,

    Apologies for the late reply. If you are only going to use the high current driver, you could check out AD8390, AD8397, AD8016 or AD8018 instead. Will these fit your application? Let me know if you have more questions.

    Thanks,

    Kris

  • RE: High current drive op-amp?

    Two ways to go here - TI THS3091 with two in parallel, or paralleled AD8018 with a transformer to step up the output voltage.  Both are current feedback amplifiers, so pay special attention to the value of Rf in the data sheet.  If output phase is not an…

  • RE: What is the expected voltage range on the 2.5 V output on the ADALM1000?

    Hi:

    The original Bill of Materials for the production run of ALM1000 has the feedback resistor for the AD8018 buffer used for the fixed 2.5 V output at 24.9K which causes the output of the buffer to be lower than the desired 2.5 V by around 50 mV due…

  • TAGS LIST: Amplifiers

    AD600
    AD602
    AD603
    AD604
    AD605
    AD8264
    AD8330
    AD8331
    AD8332
    AD8334
    AD8335
    AD8336
    AD8337
    AD8338
    ADL5246
    ADL5330
    ADL5331
    LTC6412
    HMC6187G
    HMC997G
    HMC996
    HMC694G
    AD8368
    AD8351
    AD8367
    AD75071
    AD552…