AD8016 and AD8017 are amplifiers with high output current.
Here are the links for their datasheets:
AD8016 - http://www.analog.com/static/imported-files/data_sheets/AD8016.pdf
AD8017 - http://www.analog.com/static/imported-files/data_sheets…
As understood from above, AD8017 cannot be used in inverting mode with single +5 V supply. Is it right?
Application requirement : AD8017 is used for inverting an incoming signal in the range of 2.1 to 0.6 V pulse. The expected output is a pulse…
The AD9889B can be found here
The AD7443 if in pre-release status. If you need more information on the part please contact you local FAE or sale representative. You may have to sign an NDA to get more…
The AD8017 is a current feedback amplifier, so you will need to implement the follower stage differently. Try adding a 619 ohm resistor in the feedback loop and see if that helps. Otherwise, we can try to do more troubleshooting.
I am looking for detailed or 2 wire resistor thermal models for the following devices: AD8017, AD9144, ADA4960, ADCL925, ADL5375, ADL5380, HMC7043, HMC7044, and HMC8410. I am working on preliminary thermal simulations and need more detail than the…
AD8017 is configured for use on signle +5 V power supply. It is used for inverting(unity gain) the input signal. Rf = 619 ohms and Rg = 619 ohms. Rt = 52 ohms. The positive terminal(pin no 3) is connected to ground.
When an input signal (DC) voltage of…