I have an application in which I wish to use the AD8016 with +8/-5V rails at full bias current.
Do I need to drive the PWDN1:0 pins to a "TTL high" level to accomplish this, or can these pins float? If I need to drive them, what is the…
Hi, we recently bought an evaluation board HSOPAMP 1RZ(8-Lead_LFCSP_Amplifer_UG-919) and amplifier AD8016. Then we found that AD8016 is 14-lead which is not compatible with this board. Could you please let me know whether there is an evaluation board for…
Thank you for providing additional information. I tried simulating the differential amplifier configuration as in the Figure 41 of the AD8016 datasheet with the the same feedback and gain resistors as your customer. The simulation worked well…
AD8016 and AD8017 are amplifiers with high output current.
Here are the links for their datasheets:
AD8016 - http://www.analog.com/static/imported-files/data_sheets/AD8016.pdf
AD8017 - http://www.analog.com/static/imported-files/data_sheets…
暂时没有相关的方案， 不过可以尝试一下AD8016/17, 其输出电流可以达到2A
Apologies for the late reply. If you are only going to use the high current driver, you could check out AD8390, AD8397, AD8016 or AD8018 instead. Will these fit your application? Let me know if you have more questions.
DAC AD9762 has output current of up to 20mA only so why do you need a high output current amplifier of more than 400mA? Also, SSM2211 and AD8018 have almost the same output current of 350mA so better use AD8016 which has 600mA if you really…