HI,
we are implementing 2 to 1 multiplexing circuit using AD8180.
Application1: Toggle between 0V and 1.3V using SELECT Pin ( i.e, 0/5V TTL).
Application2: Toggle between -0.6 V and -5V using SELECT Pin ( i.e, 0/5V TTL).
In both cases we are getting zero…
Phil,
Thanks a lot for the info. I will be feeding the op amp the 4 to 5 V signal at different frequencies - 10 Hz, 50 Hz, 100 Hz and 1 kHz. Based on the slew rates you mentioned, the op amps should be able to handle these inputs, correct? I will be…
There's plenty on offer from Analog Devices, so I suggest you look at the AD8010, AD8009 and AD8007. Most modern parts are short circuit protected, but you'll need to check the datasheets.
Hi Wei,
1. The UG-755 is the user guide for generic board for some of our High Speed Amplifier products. Actually, the board in UG-755 has a part number EVAL-HSOPAMP-1RZ, it caters HS products such as AD8099, AD8010, AD8011, etc. Please see the link…
| AD600 |
| AD602 |
| AD603 |
| AD604 |
| AD605 |
| AD8264 |
| AD8330 |
| AD8331 |
| AD8332 |
| AD8334 |
| AD8335 |
| AD8336 |
| AD8337 |
| AD8338 |
| ADL5246 |
| ADL5330 |
| ADL5331 |
| LTC6412 |
| HMC6187G |
| HMC997G |
| HMC996 |
| HMC694G |
| AD8368 |
| AD8351 |
| AD8367 |
| AD75071 |
| AD552… |
放大器输入保护是福是祸? 许多高速运算放大器都具有片上输入保护，在大多数情况下，这种保护对用户是透明的；但在某些应用中，这种保护可能是电路的致命弱点。来自ADI高速线性部门高级应用工程师John Ardizzoni在本文中为您分析输入保护的需求、实现及其潜在的缺点，并给出一些利用具有输入保护功能放大器的替代方案与电路方案。如果现在您还不能确定在您的设计中放大器输入到底是福是祸，那这篇文章一定不能错过哦！
高速运算放大器的输入保护有多种形式，其中共模过压保护、静电放电 (ESD)保护、输入差分对保护是一些常见的保护…
Hi Vic,
Here is an Excel sheet with devices which have > 100mA output current sorted from high to low current for your review:
Hope you can search through these and find a suitable part.
Regards,
Hooman
